DIY CNC Router milling a 10mm thick aluminium plate, front and back, with touch probe repositioning, automatic tool change and vacuum work holding.
Here is a build video: https://youtu.be/0U_ZFNjyZ00
source
DIY CNC Router milling a 10mm thick aluminium plate, front and back, with touch probe repositioning, automatic tool change and vacuum work holding. Here is a build video: https://youtu.be/0U_ZFNjyZ00 source
March 20, 2023
I just finished assembling my CNC router but I’m missing the spindle.
Let’s try to draw something with a pen!
Feedrate = 1070 mm/min.
3D printed pen holder available here:
http://www.thingiverse.com/thing:1287138
CNC Router design based on:
http://rawcnc.com
Controlled with LinuxCNC and a Gecko G540 controller
http://linuxcnc.org
http://www.geckodrive.com/geckodrive-step-motor-drives/g540.html
G-Code generation from drawing using F-Engrave:
http://www.scorchworks.com/Fengrave/fengrave.html
source
I just finished assembling my CNC router but I’m missing the spindle. Let’s try to draw something with a pen! Feedrate = 1070 mm/min. 3D printed pen holder available here: http://www.thingiverse.com/thing:1287138 CNC Router design based on: http://rawcnc.com Controlled with LinuxCNC and a Gecko G540 controller http://linuxcnc.org http://www.geckodrive.com/geckodrive-step-motor-drives/g540.html G-Code generation from drawing using F-Engrave: http://www.scorchworks.com/Fengrave/fengrave.html source
