Category: CNC Router

Are you looking forward to building your own automatic CNC routers for wood, MDF, plywood, aluminum, copper, brass, stone, foam, plastic, acrylic, and glass?

CNC Router

A CNC ROUTER THAT MACHINED ITSELF

Ivan Miranda

November 4, 2022



Check Surfshark for yourself and start browsing the internet safely here:
https://surfshark.deals/IVAN and use the promo code: IVAN

The files for the original CNC geared and non geared versions can be found here:

3D PRINTED CNC

I finally did what everyone was asking for, I machined all the parts of the 3D printed CNC out of aluminium. I used both 10 mm and 6 mm flat stock to machine all the mechanical parts and then I used a lot of elbow grease to make the borders nicer. Drilled and taped al the holes by hand but I positioned them with small marks made with the CNC. Before the change was very difficult to make the walls cut by the bit perfectly vertical because of the flex of the entire structure. After the modification the walls are perfectly vertical as far as I can tell. I also reinforced the Y axis rail beams with two more vertical posts on each side and swapped the bridge aluminium beams for steel ones. An extra benefit of this change is that I can push the motors a little bit further now as the aluminium brackets help a lot with heat dissipation were the 3D printed parts melted. There are a few improvements that still can be made, like the vacuum hood which now sits too high and does almost nothing but this is now a machine that performs extremely well for my needs. Now let’s thing of things that I can make with this machine or projects that I can bring back for a more metallic finish 😉 Leave your ideas in the comments and I’ll see what I can do.

If you want to support this channel you can do it here:

Patreon: https://www.patreon.com/ivanmiranda
Merchandise: http://ivanmiranda.space/store
PayPal: https://www.paypal.me/IvanMirandacom

For regular updates on my projects follow me on:

Instagram: https://ivanmiranda.space/instagram
Twitter: https://ivanmiranda.space/twitter
Facebook: https://ivanmiranda.space/facebook

source

Check Surfshark for yourself and start browsing the internet safely here: https://surfshark.deals/IVAN and use the promo code: IVAN The files for the original CNC geared and non geared versions can be found here: 3D PRINTED CNC I finally did what everyone was asking for, I machined all the parts of the 3D printed CNC out of aluminium. I used both

CNC Router

WOW! – Phantom CNC Router – Behind The Scene Of Phantom CNC Router & CNC Plasma Machines

admin

November 4, 2022



This video is an interview with Phantom CNC Systems co-owner Steve Wallace, the designer of the Phantom CNC routers CNC plasma cutters.

All Phantom CNC machines, including the CNC routers and Plasma cutters (and the machines that are coming,) are all 220 volt single phase.

The unit I purchased was the Phanton CNC SCV 4×4. to see the cost, visit Phantom CNC Systems listed below. Some machines require quotes. If you want a quote, request one from the Phantom CNC website.

Phantom CNC Systems website → https://www.phantomcncsystems.com/

Learnyourcnc is a well-built training program for designing and more → https://www.learnyourcnc.com/
***Kyle @learnyourcnc on Instagram

Shopbot CNC machines → https://www.shopbottools.com/

Izzy Swan on YouTube → https://www.youtube.com/c/izzyswan

Statedwoods YouTube channel Nick → https://www.youtube.com/c/StatedwoodsCo

Tacoma Narrows Bridge Disaster video → https://www.youtube.com/watch?v=MDzhIZafL4I

#cnc #cncrouters #cncforbeginners #phantomcnc #phantomcncsystems #idcwoodcraft
——————————————————
ROUTER BITS FOR CNC ROUTERS
→ 11-pc carbide CNC router bit set (w/ free vector files) https://bit.ly/3d1iQnF
→ 1” Surfacing bit required for surfacing your spoil board: https://bit.ly/2QEYLKz

→ Glass engraving drag bit: https://bit.ly/3tRy98s

OTHER ‘MUST HAVES’ FOR CNC ROUTERS
→ Calipers: https://amzn.to/338MAt3
→ Hearing protection (plugs don’t work): https://amzn.to/2Hs1RgW
——————————————————
Recommended Design Software
→ Vcarve Pro (RECOMMENDED)→ https://bit.ly/3d4WrEU
→ Vcarve Desktop → https://bit.ly/3D4CwjH
→ Vectric Aspire → https://shrsl.com/37pw9
→ Cut2D Desktop → https://shrsl.com/36xfm
→ Carveco (budget) → https://bit.ly/37rhVbY
___________________________
Starbond CA Glue Products
GET 10% OFF when you use this discount code: IDCWOODCRAFT
Starbond link: https://bit.ly/3g81RRU
———————————————

_____________________________
MAKING MONEY WITH A CNC
Words are the top-selling items of all time with CNC products. Get the free WORDS THAT SELL list: https://idcwoodcraft.com/cnc-lp-1/
Join CNC ENTREPRENEURS Facebook group: https://www.facebook.com/groups/cncentrepreneurs
——————————————————
CNC FREE STUFF AND MORE
CNC Insiders sign up (free files and more): https://idcwoodcraft.com/cnc-lp2-free-files/
——————————————————
NEW TO CNC OR STUCK IN A PROJECT?
Schedule one-on-one time with me: https://idcwoodcraft.com/for-beginners/
——————————————————
PLAYLISTS
CNC FOR BEGINNERS: https://bit.ly/3rg4WTl
CNC ENTREPRENEURS: https://bit.ly/3mxz6Ok
VECTRIC VCARVE & ASPIRE TUTORIALS FOR BEGINNERS: https://bit.ly/3pdmFsi
——————————————————
If you currently own a CNC router, please take a moment to take this survey to share your experience with it: https://bit.ly/3r5XzNh
——————————————————

Please support IDC Woodcraft Youtube channel:
Buy me a cup of coffee: https://www.buymeacoffee.com/garrettfromme
——————————————————
Cool vector files for CNC router & CNC laser: https://etsy.me/3oxX79l
——————————————————
CNC FOR BEGINNERS PODCAST: https://anchor.fm/cnc-for-beginners
——————————————————
Garrett Fromme
Facebook: https://fb.me/IDCWoodcraft
Website: www.idcwoodcraft.com
Email: [email protected]

source

This video is an interview with Phantom CNC Systems co-owner Steve Wallace, the designer of the Phantom CNC routers CNC plasma cutters. All Phantom CNC machines, including the CNC routers and Plasma cutters (and the machines that are coming,) are all 220 volt single phase. The unit I purchased was the Phanton CNC SCV 4×4. to see the cost, visit

CNC Router

how to make a tablet with a cnc router

walter mason

November 4, 2022



This video shows how to make a simple round tablet with a handle on one side using a cnc router.

The video also demonstrates the making of a jig using a cnc router. This kind of thing is useful if you want to router something from both sides.

Both of the Tablets are oiled with rubio monocoat.

source

This video shows how to make a simple round tablet with a handle on one side using a cnc router. The video also demonstrates the making of a jig using a cnc router. This kind of thing is useful if you want to router something from both sides. Both of the Tablets are oiled with rubio monocoat. source

CNC Router

Ben Heck’s CNC Router Tutorial

element14 presents

November 3, 2022



In this episode Ben explains the ins and outs of CNC milling using only a Shapeoko and a laptop. Areas of focus include an overview of the parts, creating design files, execution and other CNC tips.

http://element14.com/tbhs

source

In this episode Ben explains the ins and outs of CNC milling using only a Shapeoko and a laptop. Areas of focus include an overview of the parts, creating design files, execution and other CNC tips. http://element14.com/tbhs source

CNC Router

Making a CNC Router – Part 1

TAOW

November 3, 2022



This video is part 1 in a 4 part series on building a new CNC Router. This video covers the design and components that I have decided on using.

Link to the playlist with the rest of the build videos:

This has been a massive project for me, I started it over a year ago and it has taken the whole of lock down to get to this point. I hope you enjoy it!

Loads of people have asked for the CAD files. I was planning on releasing the finished CAD with the last video as I am regularly updating it as I make changes to the design but since so many people are asking here is a link to the unfinished CAD:
https://a360.co/3exLDRg
The design is not finished yet, still lots to add, and I’m not sure if the link will update as I update the design, but a final version will be included in the last video.

Intro: (0:00)
Why build a new machine?: (0:35)
The Design: (3:35)
CAD: (6:48)
Components: (7:55)
Cost breakdown: (10:18)

Please consider supporting me on Patreon for early access to videos and to help keep quality content like this coming: https://www.patreon.com/TheArtOfWeapons?ty=h

Check out my instagram for more updates: https://www.instagram.com/theartofweapons/

All music was used with permission from the creator and is royalty free.

source

This video is part 1 in a 4 part series on building a new CNC Router. This video covers the design and components that I have decided on using. Link to the playlist with the rest of the build videos: This has been a massive project for me, I started it over a year ago and it has taken the

CNC Router

10 Tips for Starting A CNC Business | Wood CNC Router Business

Cuttin It Close

November 2, 2022



These 10 tips will help you jumpstart your CNC Router business and save you time and money, Ryan goes over things he wishes he would have known before starting a CNC woodworking business. These tips he learned so far in his career and hopes that they can help you out in yours.

My Favorite CNC Router Bit – https://amzn.to/3cFhFt7

My Favorite Wood Filler / Crack Repair – https://www.starbond.com/?rfsn=5289265.e7c52e5

Video Link to Calculating Feeds and Speeds – https://youtu.be/NZ9Ko62GcJg

#1 Your CNC’s Competitive Advantage – 1:04
#2 Understand Your Competition – 3:05
#3 The CNC is Only a Tool – 5:41
#4 Programming Skills? – 6:55
#5 Know Your Product – 8:36
#6 Know What You Are Getting Into – 10:04
#7 Barriers To Entry – 11:43
#8 How Much to Charge Per Hour – 13:02
#9 Feeds and Speeds – 14:54
#10 Never be Satisfied – 16:19

Founded in 2020 Cuttin It Close is the educational platform of Drapela Works we look to provide value and insight on various wood related projects and techniques. Through training videos, CNC router techniques, unique projects, and practical applications, we hope to share our knowledge in the woodworking field and CNC Routering.

Follow Cuttin It Close/Drapela Works on Social Media:

Facebook: https://www.facebook.com/drapelawoodworks

Instagram: https://www.instagram.com/drapelaworks

source

These 10 tips will help you jumpstart your CNC Router business and save you time and money, Ryan goes over things he wishes he would have known before starting a CNC woodworking business. These tips he learned so far in his career and hopes that they can help you out in yours. My Favorite CNC Router Bit – https://amzn.to/3cFhFt7 My