Tag: Cast

CNC Milling Machine

Glacern Machine Tools – GDV Double Station Vise for CNC Milling Machines

GlacernMachineTools

March 4, 2023



http://www.glacern.com
http://twitter.com/glacern
http://facebook.com/glacern
http://vimeo.com/glacern
Glacern Machine Tools

The flagship of GMT’s workholding line is the 6″ double-station cast iron vise. Weighing in at a hefty 110 lbs, this vise securely holds multiple workpieces while damping vibration and eliminating deflection.

The unique leadscrew design allows clamping of different sized workpieces. The fixed center jaw can be removed, and included hardware can be used to fix the front movable jaw, transforming the GDV into a wide-opening single station vise. In the single-station configuration, this vise has a jaw opening of 12.25″.

The hexagonal handle end of the leadscrew is recessed, allowing this vise to mounted on smaller mill tables without risk of enclosure collision. A handle socket extension is included for easy access.

The GDV-620FE comes standard with an extra large polished handle, handle extension, built-in chip guards, 11/16″ T-slot keys, and a set of four toeclamps. Each vise carries a 10-year limited warranty.

For more information visit our website at http://www.glacern.com/gdv_620fe

source

http://www.glacern.com http://twitter.com/glacern http://facebook.com/glacern http://vimeo.com/glacern Glacern Machine Tools The flagship of GMT’s workholding line is the 6″ double-station cast iron vise. Weighing in at a hefty 110 lbs, this vise securely holds multiple workpieces while damping vibration and eliminating deflection. The unique leadscrew design allows clamping of different sized workpieces. The fixed center jaw can be removed, and included hardware can

Metal CNC Machine

What is a BILLET ENGINE, and when should you get one? vs cast 2JZ: Bullet Race Engineering Tour.

Street FX Motorsport TV

March 3, 2023



Following on from our “Frankenstein 2J RB” a few weeks ago, we flew to Adelaide to speak to Darren from Bullet Race Engineering about what makes a billet engine better, and at what point you might consider one over a standard cast iron block.

While we were there we got a factory tour and watched some billet 4G63’s being milled up.

Huge thanks to Bullet for taking the time to show us around!

source

Following on from our “Frankenstein 2J RB” a few weeks ago, we flew to Adelaide to speak to Darren from Bullet Race Engineering about what makes a billet engine better, and at what point you might consider one over a standard cast iron block. While we were there we got a factory tour and watched some billet 4G63’s being milled

CNC Router

How to Cut Cast Iron on a CNC Router

Carbide 3D

February 6, 2023



Will Cast Iron machine? That is the question.

Tools shown:
#120-Z
1/8″ ZrN coated

Demonstrated on the Shapeoko Pro

source

Will Cast Iron machine? That is the question. Tools shown: #120-Z 1/8″ ZrN coated Demonstrated on the Shapeoko Pro source

CNC Milling Machine

DIY Epoxy Granite CNC Milling Machine Mold for the Bridge Part1

3D Meister

November 23, 2022



Building a casting mold for the bridge of the CNC machine with laminated boards; Threaded inserts for the linear guides, ballscrews, stepper mounting and the holes for the connection to the first part, the base. A granite board underneath provides the flatness. Inside edges are sealed with silicon and the inner faces are coated with separating wax.
Volume ca: 75 liter
All ready for the mineral cast with epoxy and rock and gravel…


source

Building a casting mold for the bridge of the CNC machine with laminated boards; Threaded inserts for the linear guides, ballscrews, stepper mounting and the holes for the connection to the first part, the base. A granite board underneath provides the flatness. Inside edges are sealed with silicon and the inner faces are coated with separating wax. Volume ca: 75