Tag: chips

CNC Milling Machine

DIY CNC Milling Machine Build (Part 15) – Mounting the Spindle, Machine Alignment and First Chips!

Seabass Engineering

March 8, 2023



This time I mount the spindle, wire in spindle control to the CNC controller, align the machine and finally make some chips!

Final part was made using a 10mm indexable insert style cutter, 20,000 RPM, 1.5mm DOC, 1400mm/m feed rate..

Enjoy!
_____________________________________
DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminium tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________

Music Credits
—————–
No Quarter – TechnoAXE

——————
Dark Vs. Light – TechnoAXE


source

This time I mount the spindle, wire in spindle control to the CNC controller, align the machine and finally make some chips! Final part was made using a 10mm indexable insert style cutter, 20,000 RPM, 1.5mm DOC, 1400mm/m feed rate.. Enjoy! _____________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling

CNC Milling Machine

Special Core (cnc milling)

CncFrezar

January 14, 2023



News and current projects : https://www.instagram.com/cncfrezar/
DONATIONS : Go To https://ko-fi.com/cncfrezar
Special Core (cnc milling)

00:00 Beginning
00:27 Back side
05:15 Front side
08:32 EDM machine

CNC Production: https://www.tomasruckbs.sk/
Machine: Three-axis machining center brand UDM-2216
EDM machine : ROBOCUT-c400ib
CAD/CAM software: Cimatron 15
My video editor:Movavi Video Editor Plus
https://www.mvvitrk.com/click?offer_id=1&pid=572
If you’re interested in learning more about cnc milling, then be sure to check out this video!

dat nguyen cnc
cnc machine operator in hindi
cnc machine job work
vmc machine operator training
millwright
cnc programmer kaise bane
cnc programming for mechanical engineering
machine operator
bmc machine
cnc machine operator training
g code
nc
laser cutting
vmc
#cncmilling #cnc #CncFrezar

source

News and current projects : https://www.instagram.com/cncfrezar/ DONATIONS : Go To https://ko-fi.com/cncfrezar Special Core (cnc milling) 00:00 Beginning 00:27 Back side 05:15 Front side 08:32 EDM machine CNC Production: https://www.tomasruckbs.sk/ Machine: Three-axis machining center brand UDM-2216 EDM machine : ROBOCUT-c400ib CAD/CAM software: Cimatron 15 My video editor:Movavi Video Editor Plus https://www.mvvitrk.com/click?offer_id=1&pid=572 If you’re interested in learning more about cnc milling, then

CNC Milling Machine

Roughing as it should be done (cnc milling)

CncFrezar

January 2, 2023



News and current projects : https://www.instagram.com/cncfrezar/
DONATIONS : Go To https://ko-fi.com/cncfrezar

Machine: Three-axis machining center brand UDM-2216
CAD/CAM software: Cimatron 15
My video editor:Movavi Video Editor Plus
https://www.mvvitrk.com/click?offer_id=1&pid=572
I used tools from companies @Palbit_official
If you’re interested in learning more about cnc milling, then be sure to check out this video!

I used tools from companies
dat nguyen cnc
cnc machine operator in hindi
cnc machine job work
vmc machine operator training
millwright
cnc programmer kaise bane
cnc programming for mechanical engineering
machine operator
bmc machine
cnc machine operator training
g code
nc
laser cutting
vmc

Roughing as it should be done (cnc milling)
#cncmilling #cnc #CncFrezar

source

News and current projects : https://www.instagram.com/cncfrezar/ DONATIONS : Go To https://ko-fi.com/cncfrezar Machine: Three-axis machining center brand UDM-2216 CAD/CAM software: Cimatron 15 My video editor:Movavi Video Editor Plus https://www.mvvitrk.com/click?offer_id=1&pid=572 I used tools from companies @Palbit_official If you’re interested in learning more about cnc milling, then be sure to check out this video! I used tools from companies dat nguyen cnc cnc