Please like, subscribe, or donate so we can keep this series going! If we can get large enough we will start doing more content! Subscribe – http://bit.ly/2HsmI20
Plasma Green 1050 http://bit.ly/3kWATxk
The green juice I recycle in my water table
Glowforge Discount Link (My Dream Laser Cutter) – http://glowforge.com/hacklab
Need a Product Designed? – https://hacklab.design
Any File or part (i.e a utility switch, micro-vibration part, etc) or any product sold on the hackLAB web site ships unassembled for inventors and is not intended to diagnose, treat, cure or prevent any human disease. Any statements made on sites or videos made from other inventors, bloggers, or YouTubers regarding the mentioned parts have not yet been evaluated by the United States Food and Drug Administration. Or to be it another way use the mentioned part at your own risk. The buyer assumes all liability for injury or unlikely death. This product is not intended to diagnose, treat, cure or prevent any disease — Context Communications LLC (dba hackLAB) . Always wear hearing, eye protection, or a helmet if necessary.
This content is intended for 18 yrs or older mature audiences and is for entertainment purposes only. All actions shown in this video are performed in a safe place using safety equipment and conducted by professionals. Do not try to recreate any devices or steps shown in this video anywhere.
Anything shown in this video is not intended for human-use, additionally, no Medical Device is being offered for sale nor plans. Seek professional help for any medical issues. Context Communications LLC (dba hackLAB) is not liable for your actions. Please always wear eye, brain, and hearing protection.
Please like, subscribe, or donate so we can keep this series going! If we can get large enough we will start doing more content! Subscribe – http://bit.ly/2HsmI20 Plasma Green 1050 http://bit.ly/3kWATxk The green juice I recycle in my water table Glowforge Discount Link (My Dream Laser Cutter) – http://glowforge.com/hacklab Need a Product Designed? – https://hacklab.design Any File or part (i.e
Today we’re rewiring a Hypertherm Powermax 30 XP plasma cutter for use on a CNC plasma table. Don’t do this. It’s dangerous. It’s also easy, and it works great.
Tools used in this video:
Hypertherm Powermax 30 XP Plasma Cutter (eBay*): http://ebay.to/2JgTrK6
Rhino Cart Welding Fixture Table (Amazon*): https://amzn.to/3za8aez
Wera Kraftform Screwdriver Set (Amazon*): https://amzn.to/2UzK6CL
Milwaukee Brushless Impact Driver (Amazon*): https://amzn.to/2Xgcjjc
Fluke 375 FC True-RMS Clamp Meter (Amazon*): https://amzn.to/3C6aeoW
Dewalt Step Drill Bit Set (Amazon*): https://amzn.to/3kb9VmJ
Assorted Waterproof Cable Glands (Amazon*): https://amzn.to/3Efr5HL
Knipex Pliers Wrench 3-Piece Set (Amazon*): https://amzn.to/2ruzS8m
Beelink T34 M Mini PC (Amazon*): https://amzn.to/3nwjy1m
ASUS 21.5″ Touch Monitor (Amazon*): https://amzn.to/3B7MbW4
Rhino Cart Welding Fixture Table (Amazon*): https://amzn.to/3za8aez
California Air Tools Ultra Quiet 2HP Compressor (Amazon*): https://amzn.to/2TQ926q
Dewalt Retracting Hose Reel (Amazon*): https://amzn.to/3lFx8NB
*These are affiliate links. When you click one of these links and make a purchase, it helps to support projects like this one.
Raw Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
http://creativecommons.org/licenses/by/3.0/
Today we’re rewiring a Hypertherm Powermax 30 XP plasma cutter for use on a CNC plasma table. Don’t do this. It’s dangerous. It’s also easy, and it works great. Tools used in this video: Hypertherm Powermax 30 XP Plasma Cutter (eBay*): http://ebay.to/2JgTrK6 Rhino Cart Welding Fixture Table (Amazon*): https://amzn.to/3za8aez Wera Kraftform Screwdriver Set (Amazon*): https://amzn.to/2UzK6CL Milwaukee Brushless Impact Driver (Amazon*):
Quick demonstration cutting a custom 1/8″ steel bracket on the CrossFire CNC Plasma Table with the Razorweld Vipercut 30 Plasma Cutter. Visit us at http://www.langmuirsystems.com/ to learn more!
Quick demonstration cutting a custom 1/8″ steel bracket on the CrossFire CNC Plasma Table with the Razorweld Vipercut 30 Plasma Cutter. Visit us at http://www.langmuirsystems.com/ to learn more! source
Roy reviews his Langmuir Crossfire Pro after 6 months of use. This plasma cnc table review goes over the pros and cons. Langmuir System is not a sponsor. You can find them at www.langmuirsystems.com/.
Join this channel to get access to perks:
https://www.youtube.com/channel/UCVZa2bQrCprFEk0kzmarilA/join
————————————————————–
Want more Christ Centered Ironworks?
————————————————————–
Want to SUPPORT what we do here at Christ Centered Ironworks Blacksmith Channel?
Visit my channel: https://www.youtube.com/christcenteredironworks
Stop by my website: http://www.blacksmithpdfs.com
Get some merch: https://teespring.com/stores/christ-centered-ironworks
Shop my Amazon Influencer page for shop tools: https://www.amazon.com/shop/christcenteredironworks
Social: https://www.instagram.com/christcenteredironworks
Roy reviews his Langmuir Crossfire Pro after 6 months of use. This plasma cnc table review goes over the pros and cons. Langmuir System is not a sponsor. You can find them at www.langmuirsystems.com/. Roy’s recommended plasma cutter… Amazon Affiliate Links: Hypertherm Powermax 45: https://amzn.to/3m7mr4P or Hypertherm Powermax 65: https://amzn.to/37wH8mC Join this channel to get access to perks: https://www.youtube.com/channel/UCVZa2bQrCprFEk0kzmarilA/join ————————————————————–
In this video I unbox the Langmuir systems crossfire PRO plasma table. I go over some of the features and software and compare the differences between my original Crossfire and the PRO model.
Here’s an affiliate link to the Crossfire website if you are interested in checking out the tables they have to offer.
http://store.langmuirsystems.com/?aff=16
Don’t forget to use the promo code MIKEFESTIVA this will save you $100 at checkout on a table!
Amazon paid affiliate links below.
**After Running the Titanium Plasma 45 for 3 years it’s held up great! But I feel the Hynade CUT 60 CNC Plasma with blow back pilot arc start offers much better value and is PLUG and PLAY CNC ready***
***Use the Hynade Amazon Promo code 05MIKEWELD at checkout and save 5% on selected Hynade produces.***
Amazon Paid affiliate links below
Hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN) https://amzn.to/3DEzR2m
Digital fractional calipers https://amzn.to/2wendbO
12″ Combination square https://amzn.to/3a0yQBQ
9″ Torpedo level https://amzn.to/3a0RcCH
8″ adjustable T bevel square https://amzn.to/2TZiqUX
Here’s some helpful magnetic welding clamps https://amzn.to/2rjNNOi
T joint two axis Welding Clamp https://amzn.to/2EOyy38
Two axis welding clamp 3″ https://amzn.to/2sX1svn
Small light duty 90 degree corner welding clamp small https://amzn.to/2MolQwk
Disclaimer: Important Safety Information
Your plasma cutter power supply will expose you to high voltage and high amperage electrical components. It is your responsibility to make sure that all work is done safely and with the power disconnected. If you have any doubts regarding your ability to safely perform this work, you should consult the services of a professional electrician. Mike Festiva will not be held responsible for any injury or death resulting from the incorrect or unsafe execution of this procedure.
In this video I unbox the Langmuir systems crossfire PRO plasma table. I go over some of the features and software and compare the differences between my original Crossfire and the PRO model. Here’s an affiliate link to the Crossfire website if you are interested in checking out the tables they have to offer. http://store.langmuirsystems.com/?aff=16 Don’t forget to use the
Check out the CNC Table HERE: https://www.eastwood.com/eastwood-elite-4-x-4-cnc-plasma-table-with-cnc-cut-60-plasma-cutter.html?utm_source=youtube+&utm_medium=annotation+&utm_campaign=2022-09-09&utm_content=cnc+plasma+cutter+kerf+width+
Eastwood Elite 4′ x 4′ CNC Plasma Cutting Machine with FREE 60 Amp Plasma Cutter
This machine is designed for the professional cutting up to 3/8” plate all day or the small fabricator cutting a variety of materials and shapes. Combine the large 4′ x 4′ work surface with the robust welded frame design and this unit will handle sheets up to 1000 lbs., making it great for nearly any job. Included FREE is our Inverter Powered 60 amp plasma power supply that cuts cleanly through 3/8’ steel plate with unmatched accuracy, cut quality and reliability. It’s backed by a 1-year warranty and our lifetime tech support. Now is the time to start a new hobby, business, or expand your current business with another CNC table.
The Eastwood 4′ x 4′ CNC Plasma Cutting Table Features:
CNC Table operates on standard 120 volt AC input
60 Amp Plasma Cutter operates on 240 volt AC input
Intuitive interface with easy to use touch screen
CNC Controller makes it easy for beginners, yet has the features a pro requires
Dedicated CNC Controller so you don’t have to supply a laptop to operate the machine
Robust 3 axis stepper motors assure long life and accurate cuts
Heavy gauge welded frame design assures a rock-solid foundation
Rigid design for precise gantry movements and cutting accuracy
Long 23′ torch cable on CNC Table
Steel table construction holds 60.23 Gallons
Large Waterbed: 59.05″ X-Axis; 62.99 -Axis; 3.75″ Z-Axis
Torch travel is 49.2″ in both X-Axis and Y-Axis
Leveling feet for accurate height adjustment
Plasma Cutter has a 60% Duty Cycle at 63 Amps and 100% at 49 Amps
Includes everything to get started – all you need is a CAD file
Backed by Eastwood’s 1-year warranty
Precise Metal Cutting Accuracy
This innovative, affordable, Elite CNC Plasma Cutting Machine was designed and developed by Eastwood’s own R&D staff and tested in-house on the same type of real-life projects you’ll be doing. The intuitive interface and touch screen controls are simple enough for a beginner yet loaded with the features the professionals need.
The quality stepper motors combined with the heavy duty frame provides the rock-solid foundation you require for the accuracy you demand. This Elite CNC Machine includes everything you need to start cutting, including a FREE 60 Amp Plasma Cutter, all you have to supply is the CAD file!
WARNING: Beware of lesser units that don’t include a quality waterbed, sturdy fully welded frame construction, integrated control panel so you don’t have to also purchase a laptop computer, precise torch height control or an included plasma cutting machine. Eastwood supplies all of this and more!
Warranty
1 Year Warranty
Specifications
CNC Table Specifications
Power Input: 120V, 50/60Hz, 1Ph, 1.25A
Power Plug: NEMA 5-15P
Table Construction: Steel
CNC Torch Travel: 49.2″ X-Axis and Y-Axis; 2.5″ Z-Axis
CNC Torch Hose and Wire Length: 23′
Waterbed Size: 59.05″ X-Axis; 62.99″ Y-Axis; 3.75″ Z-Axis
Waterbed Size: 60.23 Gallons (228 Liters)
Movement Accuracy: ± 0.1mm
Cutting Accuracy: ± 0.5mm
60 Amp Plasma Cutter Specifications
Power Input: 240V, 50/60 Hz
Power Plug: NEMA 6-50P
Air Input: 1/4” NPT Female Thread
Output Current Adjustment: 10-63 Amps
Duty Cycle: 60% @ 63 Amps; 100% @ 49 Amps
Arc Ignition Mode: High Frequency
Plasma Torch and Hose Length: 12.3′
Ground Cable Length: 9′
Plasma Cutter Weight: 54.5 lbs
Plasma Cutter Dimensions: 10.83″ x 22.44″ x 18.70″
Check out the CNC Table HERE: https://www.eastwood.com/eastwood-elite-4-x-4-cnc-plasma-table-with-cnc-cut-60-plasma-cutter.html?utm_source=youtube+&utm_medium=annotation+&utm_campaign=2022-09-09&utm_content=cnc+plasma+cutter+kerf+width+ Eastwood Elite 4′ x 4′ CNC Plasma Cutting Machine with FREE 60 Amp Plasma Cutter This machine is designed for the professional cutting up to 3/8” plate all day or the small fabricator cutting a variety of materials and shapes. Combine the large 4′ x 4′ work surface with the robust welded frame
