Tag: diy cnc milling machine

CNC Milling Machine

DIY CNC Milling Machine (Part 10) – Building a DIY Power Supply & CNC Machining the Z motor mount

Seabass Engineering

December 16, 2022



In this episode I use my brother’s CNC router (that he originally built for making guitars) to machine out the Z axis motor mount and I build my own 70 volt DC power supply for the stepper motors…

Transformer: Toroidal 750VA 230v AC – 24 x 24 AC output – wired in series – AirlinkTransformers.com
Vishay GBPC3504-E4/51 Bridge Rectifier
3x 4700μF 100V DC 35mm Capacitors
2x 1K2 5W resistors wired in series to discharge capacitors when mains power removed.

Still to do – Fuse the 48V output from transformer and individual outputs to Stepper Drivers.
_____________________________________
DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminum tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________

Music Credit
—————–
No Quarter – TechnoAXE

——————
Dark vs. Light – – TechnoAXE

source

In this episode I use my brother’s CNC router (that he originally built for making guitars) to machine out the Z axis motor mount and I build my own 70 volt DC power supply for the stepper motors… Transformer: Toroidal 750VA 230v AC – 24 x 24 AC output – wired in series – AirlinkTransformers.com Vishay GBPC3504-E4/51 Bridge Rectifier 3x

CNC Milling Machine

DIY CNC Milling Machine Build (Part 12) – Limit switches, Wiring and Drag Chain

Seabass Engineering

December 10, 2022



In this video I begin wiring up the machine, mounting the limit switches and attaching the drag chain for the X axis wiring.
_____________________________________
DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminum tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________

Music Credits
—————–
No Quarter – TechnoAXE

——————
Broken Toys – – TechnoAXE
Basic Metal 12 – – TechnoAXE
Machine Takeover – – TechnoAXE
Dark vs. Light – – TechnoAXE

source

In this video I begin wiring up the machine, mounting the limit switches and attaching the drag chain for the X axis wiring. _____________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger

CNC Milling Machine

DIY CNC Milling Machine Build (Part 7) – Z Axis Construction

Seabass Engineering

December 4, 2022



This time I’m building the Z axis and mounting it to the column. I’m probably going to regret saying this, but hopefully this concludes the majority of the locating, drilling and tapping of holes.
______________________________________
DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminum tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________

Music Credit
—————–
No Quarter – TechnoAXE

——————
Dark vs. Light – – TechnoAXE

source

This time I’m building the Z axis and mounting it to the column. I’m probably going to regret saying this, but hopefully this concludes the majority of the locating, drilling and tapping of holes. ______________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling machine without the need for any machining

CNC Milling Machine

DIY CNC Milling Machine Build – (Part 3) – Screwing around!

Seabass Engineering

December 1, 2022



This time I screw with my balls…

This video covers the installation of the ball screws and ball nuts.

______________________________________
DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminum tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________

Music credit…

––––––––––––––––––––––––––––––
Cali by Wataboi https://soundcloud.com/wataboi
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: https://bit.ly/wataboi-cali
Music promoted by Audio Library https://youtu.be/qXptaqHIH5g
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
Summer Madness by Roa https://soundcloud.com/roa_music1031
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: http://bit.ly/l-summer-madness
Music promoted by Audio Library https://youtu.be/onA7Si-1Py4
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
Relax by Markvard https://soundcloud.com/markvard
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: http://bit.ly/al-relax
Music promoted by Audio Library https://youtu.be/O1TefQahcHg
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
Night Out by LiQWYD https://soundcloud.com/liqwyd
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: http://bit.ly/2BLdhW5
Music promoted by Audio Library https://youtu.be/tut9O8uaJho
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
All Night by Ikson https://soundcloud.com/ikson
Music promoted by Audio Library https://youtu.be/bE2rrcUKnok
––––––––––––––––––––––––––––––

source

This time I screw with my balls… This video covers the installation of the ball screws and ball nuts. ______________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the

CNC Milling Machine

DIY CNC Milling Machine Build (Part 13) – Operators Panel and First Movements!

Seabass Engineering

December 1, 2022



In part 13:

– Wiring up the operators control panel
– Add an upper limit switch for the Z axis
– Add a pneumatic strut to support the Z
– First machine movements and backlash testing
_____________________________________
DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminium tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________

Music Credits
—————–
No Quarter – TechnoAXE

——————
Not According To Plan – TechnoAXE
Broken Toys – TechnoAXE
Dropped the E String – TechnoAxe

source

In part 13: – Wiring up the operators control panel – Add an upper limit switch for the Z axis – Add a pneumatic strut to support the Z – First machine movements and backlash testing _____________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling machine without the need for

CNC Milling Machine

DIY CNC Milling Machine Build (Part 14) Building a CNC enclosure with 3030 aluminium extrusion

Seabass Engineering

November 30, 2022



In this video I’ll be building the enclosure around the machine. I have used 3030 aluminium extrusion to construct the frame and 4mm polycarbonate for the doors and front panel. I used a cheaper (but arguably less safe) material for the sides where people are much less likely to be stood if a cutter tries to escape!

I also make some rail extensions and install bellows on the X and Y axes, as well as begin to mount the spindle clamp to Z axis.

In the next episode i’ll be mounting and wiring up the Chinese 3KW ER20 spindle!
_____________________________________
DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminium tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________

Music Credits
—————–
No Quarter – TechnoAXE

——————
Not According To Plan – TechnoAXE
Basic Metal 12 – TechnoAXE
Future Ghost – TechnoAXE

source

In this video I’ll be building the enclosure around the machine. I have used 3030 aluminium extrusion to construct the frame and 4mm polycarbonate for the doors and front panel. I used a cheaper (but arguably less safe) material for the sides where people are much less likely to be stood if a cutter tries to escape! I also make