So I’ve build a CNC Router, now for a CNC Plasma Table.
Part one I blather on about the what’s and why’s. There are nuggets in all these words, both for those that wish to offer constructive feedback and for those that are considering their own build and struggling with where to put their efforts.
So I’ve build a CNC Router, now for a CNC Plasma Table. Part one I blather on about the what’s and why’s. There are nuggets in all these words, both for those that wish to offer constructive feedback and for those that are considering their own build and struggling with where to put their efforts. source
We welcome Bar Smith and Hannah Teagle to show us their Maslow CNC cutting machine, which comes in a $350 kit. This CNC uses an upright design to hold a 4×8 foot sheet of plywood, and is completely open source. We talk about the goals of the Maslow CNC project and what kind of big things it can make!
Find out more about the Maslow here: http://www.maslowcnc.com/
Shot by Gunther Kirsch and edited by Norman Chan
Subscribe for more videos (and click the bell for notifications): http://www.youtube.com/subscription_center?add_user=testedcom
Twitter: http://www.twitter.com/testedcom
Facebook: http://www.facebook.com/testedcom
Instagram: https://www.instagram.com/testedcom/
Tested is:
Adam Savage http://www.twitter.com/donttrythis
Norman Chan http://www.twitter.com/nchan
Simone Giertz http://www.twitter.com/simonegiertz
Joey Fameli http://www.twitter.com/joeyfameli
Kishore Hari http://www.twitter.com/sciencequiche
Frank Ippolito http://www.twitter.com/frankippolito
Sean Charlesworth http://www.twitter.com/cworthdynamics
Jeremy Williams http://www.twitter.com/jerware
Gunther Kirsch
Ryan Kiser
We welcome Bar Smith and Hannah Teagle to show us their Maslow CNC cutting machine, which comes in a $350 kit. This CNC uses an upright design to hold a 4×8 foot sheet of plywood, and is completely open source. We talk about the goals of the Maslow CNC project and what kind of big things it can make! Find
RS-CNC32 is a home made CNC milling machine, assemble your own easily with free tutorials on https://www.makerfr.com
Tutorials are available in English and French
RS-CNC32 is a home made CNC milling machine, assemble your own easily with free tutorials on https://www.makerfr.com Tutorials are available in English and French source
*SUBSCRIBE* Today we got some more knocked out on the diy CNC Plasma Table Build using parts from precision plasma and fourhills designs. I got the gear reduction units adjusted and put loctite on the drive gears. After that I got the gear rack mounted up in place, mounted the motors and installed the z axis. All in all a good day with lots to show for it.
*SUBSCRIBE* Today we got some more knocked out on the diy CNC Plasma Table Build using parts from precision plasma and fourhills designs. I got the gear reduction units adjusted and put loctite on the drive gears. After that I got the gear rack mounted up in place, mounted the motors and installed the z axis. All in all a
My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.
By using aluminum tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!
Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________
Music credit…
––––––––––––––––––––––––––––––
Mood by Peyruis https://soundcloud.com/peyruis
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: https://bit.ly/al-mood
Music promoted by Audio Library https://youtu.be/dsdYAMcNcwI
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
Gonna Sing by Peyruis https://soundcloud.com/peyruis
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: https://bit.ly/peyruis_gonna-sing
Music promoted by Audio Library https://youtu.be/kPVJUD9Wo98
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
Spaceship by Lesion X https://soundcloud.com/lesionxbeats
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: https://bit.ly/lesion-x-spaceship
Music promoted by Audio Library https://youtu.be/-FrY1jeHB2s
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
Twenties by Peyruis https://soundcloud.com/peyruis
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: https://bit.ly/twenties-peyruis
Music promoted by Audio Library https://youtu.be/t9glFROS8-k
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
Cali by Wataboi https://soundcloud.com/wataboi
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: https://bit.ly/wataboi-cali
Music promoted by Audio Library https://youtu.be/qXptaqHIH5g
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
Tonight by Rexlambo https://soundcloud.com/rexlambo
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: http://bit.ly/-tonight
Music promoted by Audio Library https://youtu.be/Lct7aahfiMM
––––––––––––––––––––––––––––––
In this video I add some heavy duty castors to the steel frame and tack weld the Z column to the base plate. ______________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger
