February 17, 2023
In this episode you will learn how to use different coordinate system in one G-code file, and how to setup each coordinate system, as example G54 G55 G56 and MACH on the DDCS V3.1.
00:00 Welcome
00:40 Coordinate system explanation
01:43 G53
source
In this episode you will learn how to use different coordinate system in one G-code file, and how to setup each coordinate system, as example G54 G55 G56 and MACH on the DDCS V3.1. 00:00 Welcome 00:40 Coordinate system explanation 01:43 G53 source
Stone Turning on a Wood Lathe! I take a granite field stone and turn a natural edge/ live edge cup on my wood lathe using diamond tools and polishing pads.
Please be sure to visit https://bisonhillstonecrafts.com and see all the products they have to offer!
The stone was found on a family farm in Waterford, PA and is a very dark green granite with white veining. The final cup is 3″ in diameter and 6″ tall and holds about 10 oz of liquid. Subscribe for more artistic stone working videos!
#BisonHillStonecrafts #StoneTurning #TheFinders
source
Stone Turning on a Wood Lathe! I take a granite field stone and turn a natural edge/ live edge cup on my wood lathe using diamond tools and polishing pads. Please be sure to visit https://bisonhillstonecrafts.com and see all the products they have to offer! The stone was found on a family farm in Waterford, PA and is a very
