Tag: fire

CNC Plasma Cutter

Southwestern Fire Pit, BurnTables CNC Plasma Table, Hypertherm Plasma Cutter, Lincoln Welder

TeamRobinsoncom

April 7, 2023



Here is a quick 360 degree video view of a TRM Artistic Metal Creations Southwestern Fire Pit customized with adding the customers name to the bottom, built on our BurnTables CNC Plasma Table using a Hypertherm Powermax 45 and Lincoln Welder!!!

source

Here is a quick 360 degree video view of a TRM Artistic Metal Creations Southwestern Fire Pit customized with adding the customers name to the bottom, built on our BurnTables CNC Plasma Table using a Hypertherm Powermax 45 and Lincoln Welder!!! source

CNC Plasma Cutter

Cutting out a simple fire pit on a CNC plasma table

Mike Roberson

January 11, 2023



Cutting out a simple fire pit on a CNC plasma table. As always read the manufacturers safety and operating instructions before operating any power equipment.

We will have another video showing the finished product.

source

Cutting out a simple fire pit on a CNC plasma table. As always read the manufacturers safety and operating instructions before operating any power equipment. We will have another video showing the finished product. source

CNC Plasma Cutter

Build a CNC Plasma Cutter for under $1,000

Strange Garage

October 26, 2022



What’s up guys! Here is a overview video on how I built my CNC plasma cutter. I’m planning on doing several more detailed videos on this subject, but I wanted to start off with a cliffhanger to get some buzz going.

For the cutter itself I used the YesWelder Cut-55DS, if you want to purchase anything from the YesWelder website you can use Coupon code “Strange” at checkout for 10% off your purchase.

I’m running the controller from Mach3 via a parallel port, and I’m generating my G-code from Fusion360.

Setting up a CNC controller:

Building a metal CNC structure:

All of my hardware was purchased from eBay:
Sain Smart 5 axis CNC breakout board
external drivers
NEMA23 stepper motors (twin shaft)
8MM pillow block bearings
8MM flexible shaft couplers
8MM ACME screw (47″ long)

Steel is 2X2 angle, and 2X2 tubing for the legs, with 3″ swivel casters underneath. I did not build the bed yet, one thing at a time.

source

What’s up guys! Here is a overview video on how I built my CNC plasma cutter. I’m planning on doing several more detailed videos on this subject, but I wanted to start off with a cliffhanger to get some buzz going. For the cutter itself I used the YesWelder Cut-55DS, if you want to purchase anything from the YesWelder website