Tag: garden

CNC Router

127 How to operate a CNC router for beginners

Roger Webb

September 23, 2023

Plans and parts listing available on my Patron pages for the, AMAX 3636, MIDI 4040, MAXI 1212, and AMAX 3636 CNC Router, Sieg X2 CNC Mill & Sieg 4 x 20 CNC Lathe + Mach 3.5 Info

My CARVECO 5% discount code is
ROGERWEBB5798
(ONLY AT THIS ADDRESS BELOW)
https://store-us.carveco.com/?ref=B40mt_z8N7xiu

The Australian Inventors Workshop™ 2023
Sponsored By
Thunder Laser Global

My Fusion 360 20% discount
(ONLY AT THIS ADDRESS BELOW)
http://aklam.io/pWk31e

WARNING: This/These video/s are NOT SUITABLE FOR CHILDREN UNDER 16! Disclaimer: These videos, commentary, and or advice are intended for entertainment and inspiration for adults over 16 -year-old. Woodworking and metalworking are dangerous. Always seek professional advice and training before using any power tools or CNC machines. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand, that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw or heard it in one of my videos. You can have a safe, enjoyable, and even inspirational time in your workshop by understanding your own tools, materials, and your own skill level.

source

This video is an introduction to how a CNC router works, the operating computer system Mach 3 that runs it and ArtCam CAM program. Thank you for watching Help support my channel and become a Patron https://www.patreon.com/user?u=15079773 Plans and parts listing available on my Patron pages for the, AMAX 3636, MIDI 4040, MAXI 1212, and AMAX 3636 CNC Router, Sieg

CNC Router

CNC router 4th axis setting up for beginners

Roger Webb Channel 2 CNC,s and more

March 10, 2023

Australian Inventor Roger Webb demonstrates CNC router 4th axis setting up for beginners
Patreon
https://www.patreon.com/user?u=15079773

Wood Lathes CNC’s, Laser’s and CAD/CAM tutorials

Autodesk Fusion 360 www.autodesk.com/products/fusion-360

Disclaimer:
These videos, commentary and or advice are intended for entertainment and inspiration. Woodworking and metalworking is dangerous. Always seek professional advice and training before using any power tools or CNC machine. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw or heard it in one of my videos. You can have a safe, enjoyable, and even inspirational time in your workshop by understanding your own tools, materials, and your own skill level.

source

Australian Inventor Roger Webb demonstrates CNC router 4th axis setting up for beginners Patreon https://www.patreon.com/user?u=15079773 Wood Lathes CNC’s, Laser’s and CAD/CAM tutorials Autodesk Fusion 360 www.autodesk.com/products/fusion-360 Disclaimer: These videos, commentary and or advice are intended for entertainment and inspiration. Woodworking and metalworking is dangerous. Always seek professional advice and training before using any power tools or CNC machine. If you

Stone CNC Machine

CNC carving of Diamond Stone panel

SHIVAM STONEX

February 14, 2023

CNC carving and outdoor design of wall panels, Garden Fountain from Marble and sandstone in India.
We are manufacturer and exporter of Fountains, Fireplaces and Stone handicraft items from India.

CNC carving and outdoor design of wall panels, Garden Fountain from Marble and sandstone in India. We are manufacturer and exporter of Fountains, Fireplaces and Stone handicraft items from India. Contact us : +918005980137 source

CNC Plasma Cutter

Can You Cut Stainless Steel With A CNC Plasma Cutter?

WAY OUT WEST with Sandra and Tim

December 6, 2022

I was asked to cut parts out of stainless steel – my first time doing this with my cnc plasma cutter. I didn’t design them – my job was just to cut them out and then clean them up.

The plasma-cutter is by R-Tech https://www.r-techwelding.co.uk/

and the combined cnc machine is by Xtreme Plasma https://xtremeplasma.ecwid.com/

Tell them Tim sent you..

Ok, here are some important website links. Please check them out..

Here’s Tim’s amazing guitar machine..
http://www.chordelia.com

here’s our online store where you can see some of the craft things we make and sell..
http://www.wayoutwestemporium.com/

If you would like to help and encourage us then please do! It’s easy and means such a lot..
One-off donation – https://www.paypal.me/wayoutwestblowinblog
and here’s our Patreon page where you can see more of our plans and dreams. (Remember even 5 dollars would make a BIG difference to us and we’d be very grateful.)
https://www.patreon.com/user?u=2761318&ty=h

and finally our FaceBook page https://www.facebook.com/way.outwest.524/ (Not quite sure what to do with this but we put photos and extra comments when we get around to it..)

Thank you!
Sandra & Tim
[email protected]

I was asked to cut parts out of stainless steel – my first time doing this with my cnc plasma cutter. I didn’t design them – my job was just to cut them out and then clean them up. The plasma-cutter is by R-Tech https://www.r-techwelding.co.uk/ and the combined cnc machine is by Xtreme Plasma https://xtremeplasma.ecwid.com/ Tell them Tim sent you..