Tag: GoFabCNC

CNC Plasma Cutter

BEST HOME BUILT CNC PLASMA TABLE 4X10` #1,To replace the GoFabcnc

CNC FUN

February 19, 2023



My New GoFabcnc I got Dec 2019 worked great for 2 months !! Then they came out with new software we had to update to ! That software was nothing but junk. torch would come down hit metal, almost breaking my torch. It ended up blowing my 80 amp Plasma cutter, due to contacting metal. Plasma guy, sent me a Brand new one ! I had no choice but to build my own controls After going with MyPlasm board with THC, and Automation Drivers, and 2 48 volt power supplies, and new Z axis, and a new Hypertherm 45XP, It was cutting flawless ! but GoFab table are known for Sawtooth cuts, and I still have that. So I’m building my own table with the best parts out there.

My Facebook Site.
https://www.facebook.com/profile.php?id=100057341353859

source

My New GoFabcnc I got Dec 2019 worked great for 2 months !! Then they came out with new software we had to update to ! That software was nothing but junk. torch would come down hit metal, almost breaking my torch. It ended up blowing my 80 amp Plasma cutter, due to contacting metal. Plasma guy, sent me a

CNC Plasma Cutter

Cutting Square Tubing on your Go Fab CNC Plasma Table

Go Fab CNC

February 7, 2023



We use our Table like a custom Drill Press to save a lot of time and a ton of labor cutting thousands of holes in Square Tubing.

We only cut circular holes and rectangular holes, but you could cut any shape you want such as words, artistic designs, bolt patterns, etc.

The clearance between the Tip of the Torch and the top of the Cutting Bed Slats is 3″. The Cutting Bed is removable for extra clearance allowing a total of 8″.

The Table Frame is robust enough to support over 2,500lbs. of material weight allowing for taller material such as C Channel and I Beams.

source

We use our Table like a custom Drill Press to save a lot of time and a ton of labor cutting thousands of holes in Square Tubing. We only cut circular holes and rectangular holes, but you could cut any shape you want such as words, artistic designs, bolt patterns, etc. The clearance between the Tip of the Torch and