I couldn’t find a handheld plasma cutting table with a water table for sparks and slag, so I built my own. This video covered the design, material, and steps to build your own.

The Handheld CNC Plasma Cutter Video is COMING SOON, Subscribe and stay tuned. The hand plasma cutter table was the first thing I needed to build to be able to use the handheld CNC plasma cutter.

▼ MATERIALS:
▶ 2X Aluminum 80/20 Extrusion (Long Side Rails), 1x2x36in: https://www.mcmaster.com/47065T107

▶ 2X Aluminum 80/20 Extrusion (Short Side Rails), 1x2x24in: https://www.mcmaster.com/47065T107
Choose 2ft length.

▶ 3X Aluminum 80/20 Extrusion(Slat Supports), 1x1x36in: https://www.mcmaster.com/47065T101
Choose 3ft length.

▶ 4X Aluminum 80/20 Extrusion (Legs), 1x1x12in:
https://www.mcmaster.com/47065T101
Choose 1ft length or buy longer and cut to length.

▶ 24X T Slot End Fastners: https://ebay.us/DSEITk
(Much more expensive on McMaster: https://www.mcmaster.com/47065T155 )

▶ 54X T Slot Nuts: https://amzn.to/3oJL22r

▶ 54X 1/4-20 x 1-1/4in Long Threaded Rod: https://www.mcmaster.com/91565A544

▶ 6X 1/8in thick by 1in wide by 6ft Flat Steel Bar: Available at Home Depot, hardware store, steel mill

▼ TOOLS:
▶ MARKSMITH Titanium permanent marker made by us: https://amzn.to/3nWisMa

▶ Drill – Ryobi Brushless 18V

▶ Drill & Tap Guide: https://amzn.to/327hFPZ

▶ Tap Guide: https://amzn.to/3oK58d8

▶ 1/4-20 Spiral Point Tap (buy good quality, otherwise you’ll regret it): https://amzn.to/3cyfJSy

▶ Knipex Plier Wrench 10in (The best pliers ever made. You will find yourself using these for everything.): https://amzn.to/3p1SqGG

▼ IN THIS VIDEO
0:00 Intro
2:26 Materials Needed
3:52 Fasteners
5:11 Legs
5:40 Slat Support Design
6:28 STEP 1: Tap Rail Ends
8:34 STEP 2: Legs/Corner Brackets
11:56 STEP 3: Slat Support Holes
13:40 STEP 4: Install Slat Stops
15:26 STEP 5: Add Slat Supports
16:11 STEP 6: Assemble Frame
19:44 STEP 7: Making Slats
20:38 STEP 8: Install Slats
21:00 Test Cuts
21:14 Conclusion & Handheld CNC Plasma Cutter
22:05 What’s Next?

#plasmacutting #plasmacutter #cncplasma #plasmatable #cncplasmacutter #cncplasmacuttingmachine #plasma

EASY DIY Plasma Cutting Table – With Spark Collector

How To Make A PLASMA CUTTING TABLE using this DIY Easy To Build, Bolt Together Cutter Table Design

How To Make A PLASMA CUTTING TABLE With SPARK COLLECTOR | DIY Easy To Build Design for Plasma Cutter

How To Make A PLASMA CUTTING TABLE using this DIY Easy To Build, Bolt Together Cutter Table Design

Every Metal Shop Needs This Plasma Cutting Table. So Easy To Build It… | DIY Plasma Cutter Table

DIY Hand Plasma Cutting Table w/ Water Table Is Easy To Build For Handheld Metal Cutting

Easy DIY Hand Plasma Cutting Table w/ Water Pan for Catching Sparks & Slag | Handheld Metal Cutting

The products shown here were purchased by me with the intent to use them. I did not receive any free items, and I am not being paid or compensated for this review. The video, description, and comments may contain affiliate links. If you click on a link, I may receive a commission. Money earned helps to support my channel and bring you more informative videos about engineering, crafting, and DIY.

source