The ToeCutter 5 Prime CNC – https://www.pdjinc.com The size shown is 84 X 128 X 36 inches travel! This is the floor model so it is called the ToeCutter! Designed for making aircraft’s but can do so much more We have both stand and floor options. Milling – routing – printing – lasing – etc on 1 machine! Perfect for
I finally did what everyone was asking for, I machined all the parts of the 3D printed CNC out of aluminium. I used both 10 mm and 6 mm flat stock to machine all the mechanical parts and then I used a lot of elbow grease to make the borders nicer. Drilled and taped al the holes by hand but I positioned them with small marks made with the CNC. Before the change was very difficult to make the walls cut by the bit perfectly vertical because of the flex of the entire structure. After the modification the walls are perfectly vertical as far as I can tell. I also reinforced the Y axis rail beams with two more vertical posts on each side and swapped the bridge aluminium beams for steel ones. An extra benefit of this change is that I can push the motors a little bit further now as the aluminium brackets help a lot with heat dissipation were the 3D printed parts melted. There are a few improvements that still can be made, like the vacuum hood which now sits too high and does almost nothing but this is now a machine that performs extremely well for my needs. Now let’s thing of things that I can make with this machine or projects that I can bring back for a more metallic finish 😉 Leave your ideas in the comments and I’ll see what I can do.
If you want to support this channel you can do it here:
Check Surfshark for yourself and start browsing the internet safely here: https://surfshark.deals/IVAN and use the promo code: IVAN The files for the original CNC geared and non geared versions can be found here: 3D PRINTED CNC I finally did what everyone was asking for, I machined all the parts of the 3D printed CNC out of aluminium. I used both
The CNC has a half sheet of plywood cut capacity with a maximum thickness allowance of 6″. The entire unit cost under $900 to make. A free set of plans and cost breakdown analysis (with links to every product used) is available for download on my website DIYBuilds.ca
Support DIY Builds on Patreon:
https://www.patreon.com/DIYBuilds
Buy a T-shirt to support the channel:
https://teespring.com/stores/diy-builds
Visit my website for free plans and see viewer builds:
http://diybuilds.ca
Follow me on Instagram:
https://www.instagram.com/diybuilds
Follow me on Facebook:
https://www.facebook.com/DIYBuilds
The CNC has a half sheet of plywood cut capacity with a maximum thickness allowance of 6″. The entire unit cost under $900 to make. A free set of plans and cost breakdown analysis (with links to every product used) is available for download on my website DIYBuilds.ca Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds Buy a T-shirt to support the
My objective for this project was to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.
By using aluminium tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!
Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
DIY CNC Milling machine build. My objective for this project was to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel. By using aluminium tool plate (which is in theory pre-machined flat) and bolting the critical
*** EXPAND THIS DESCRIPTION FOR MORE INFORMATION***
My 81 generic flower templates: https://www.etsy.com/uk/DelisleDesign/listing/1244017983/81-flower-and-leaf-templates-in-pdf-dxf?utm_source=Copy&utm_medium=ListingManager&utm_campaign=Share&utm_term=so.lmsm&share_time=1654179398204
My designs/comissioning: https://www.etsy.com/uk/shop/DelisleDesign
Watch Joshua De lisle AWCB walk you through the creation process with his welded and hand forged works of Art and Luxury items.
In this episode we build a GRBL CNC plasma table for only £150 (not including the plasma machine or compressor), we look at the DIY build, how to operate CAM software, use the GRBL offline controller, a sneeak peak at my new 81 generic flower template downbload and how optimise the machine for large production.
Chapter selection:
Intro – 0:00
Build overview – 01:35
Plasma cutting machine – 02:48
Torch bracket design- 04:02
plasma and relay wiring- 05:50
Table bed- 8:02
Work flow test- 10:19
THC alternative- 14:09
GRBL offline controller and G code- 17:19
Sheetcam software- 25:47
Nozel replacement- 34:18
Cutting holes in box section without CAD- 35:31
Large 2m x 1m table idea- 37:05
Gantry design close up and pricing- 38:10
Conclusion- 39:16
My plasma cutter is a PLASMARGON Air Plasma Cutter Plc 55Pro £235 is what I payed.
USA: https://amzn.to/3vFDt1e
Banggood LTD is an end of line limited stock whole saler straight from China, when its gone its gone and the prices change constantly, so the bellow links may not have stock anymore but If you visit frequently you may find an even better deal.
Amazon affiliate links USA:
Plasma P80 consumables: https://amzn.to/3m5R4JN
P80 machine torch: https://amzn.to/3alNRU4
50Amp Plasma Pilot arc machine: https://amzn.to/3m71Gbp
Tactical mount: https://amzn.to/3zd6HqE
20 gal compressor: https://amzn.to/3avOmLb
Bed screws: https://amzn.to/3PVXhWw
Featured G code snippets (operates from 0,0 position) :
– Pierce:
G00 X 0 F 9000
M3 S 500
G01 F 9000
G04 P (type in pierce duration here)
M5
– Pierce + travel in X direction:
G00 X 0 F 9000
M3 S 500
G01 F 9000
G04 P 0.25
G01 X (type in length here) F (type in feed rate here)
M5
My Settings (will be updating as I gather more information):
@50Amps and 70psi
Feed rate:
1mm thick steel = F2850
3mm thick steel = F850
6mm thick steel = F425
Pierce dwell is generally P 0.25
For latest news and insights visit our instagram page here:
https://www.instagram.com/delisledesign
FaceBook page here (I’m not on it enough to answer questions on FB):
https://www.facebook.com/DeLisleDesign
*** EXPAND THIS DESCRIPTION FOR MORE INFORMATION*** My 81 generic flower templates: https://www.etsy.com/uk/DelisleDesign/listing/1244017983/81-flower-and-leaf-templates-in-pdf-dxf?utm_source=Copy&utm_medium=ListingManager&utm_campaign=Share&utm_term=so.lmsm&share_time=1654179398204 My designs/comissioning: https://www.etsy.com/uk/shop/DelisleDesign Watch Joshua De lisle AWCB walk you through the creation process with his welded and hand forged works of Art and Luxury items. In this episode we build a GRBL CNC plasma table for only £150 (not including the plasma machine or compressor), we
