We take advantage of China’s cost advantages and industrial chain advantages to accomplish the goal of“save your cost,deliver on time”.We have won an excekkent retutation among the customers we have served in the past ten years and formed a long-term collaboration.
Ever wondered why your laser engravers performance has decreased? Have you cleaned it recently?
Today we cleaned out our Nozzle and lens housing and found something crazy…..
Tons of little particles and the external case of the nozzle was covered in soot. We cleaned these parts off and now have an extreme increase in power. The particle were scattering the beam and even blocking it from cutting/ etching properly. Paired with our new Amp meter we are golden.
We also recent did a nozzle focal test and found the proper focal length to be at 22mm. We have made jigs to easy get it 100% on point with our lens. If interested in one of these jigs let us know and we can get one out to you.
#laserengraving #laseretching #arnoldprints
My Photography Gear:
CAMERAS:
Panasonic GH5 Body Main A Roll Camera https://amzn.to/2XqzVwI
Panasonic Gx9 Body B Roll and Stills https://amzn.to/2WqKfrX
Iphone X Portrait Photography and Misc https://amzn.to/2Wsu7GC
AUDIO:
Blue Yeti 1967 Yeti Pro for interviews XLR https://amzn.to/2K1xH3O
Blue Radius Yeti Shock Mount https://amzn.to/2IqBeVT
Zingyou Microphone Yeti Pop Filter https://amzn.to/2EUl9ac
Amazon Basic Tripod Boom Mic mount https://amzn.to/2K2BFcu
Tascam DR44-WL Handheld Mic (Main) https://amzn.to/31dk7PY
Lighting:
Neewer Studio kit https://amzn.to/2K2Dm9Q
Neewer Ring Light Upgraded Kit LED https://amzn.to/2K0P5FO
Ever wondered why your laser engravers performance has decreased? Have you cleaned it recently? Today we cleaned out our Nozzle and lens housing and found something crazy….. Tons of little particles and the external case of the nozzle was covered in soot. We cleaned these parts off and now have an extreme increase in power. The particle were scattering the
Welcome to oree laser’s class. Today we will introduce to you how to maintain the laser head daily?
1.Turn off the laser device, loosen the screws.
2.Seal with pre-prepared tape to prevent dust from entering.
3.Check if there are black spots or oil stains on the lens.
4.When replacing the lens, first remove the pressure pad above the lens.
5.Then take out the broken lens. (Note: Do not touch the surface of the lens when taking the lens, and do not touch the lens when placing the lens)
6.Cover the pressure pad.
7.Lens replacement completed.
8.Check again whether the replaced lens is clean.
9.Tighten the screws.
This realizes the replacement of the protective lens. This is the end of the knowledge of protective mirror replacement. If you have any questions, feel free to contact us. I will continue to talk about more knowledge in the next issue.
Welcome to oree laser’s class. Today we will introduce to you how to maintain the laser head daily? 1.Turn off the laser device, loosen the screws. 2.Seal with pre-prepared tape to prevent dust from entering. 3.Check if there are black spots or oil stains on the lens. 4.When replacing the lens, first remove the pressure pad above the lens. 5.Then
SCULPFUN S30 Series-Revolutionary Innovation！Automatically controlled air assist system!
S30 (5W), S30 Pro (10W), S30 Pro Max (20W)
Features:
1. Automatically controlled air assist system: The traditional adapter air assist will always be turned on and cannot be controlled during engraving, and the engraved pattern will be smoked into a fuzzy fog. The S30 series is equipped with an airassist 32-bit motherboard and a control-type air pump, which can intelligently control the air-assist switch during engraving through the LightBurn software M8 button, this makes the engraving and cutting very clean, and is very suitable for the manufacture of exquisite gifts.
2. Built-in high pressure air assist nozzle: S30 series is equipped with advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assistance. The powerful airflow blows away the residue, making the cut surface very clean.
3. Ultra-thin 5W, 10W, 20W three laser options: S30 series adopts ultra-thin laser shaping technology, the laser focus is as thin as hair, very powerful for engraving or cutting. S30 5W laser is high cost-effective and can meet 90% of hobby needs; S30 Pro 10W laser is suitable for frequent cutting, do everything faster; S30 Pro Max 20W pursues the ultimate cutting speed, suitable for professionals, shops or factoriy.
4. Replaceable protective lens: S30 series laser adopts innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore the cutting power. A free lens is included with the purchase, more lens can be easily purchased from SCULPFUN.
5. Expandable engraving area on both XY axes: The S30 series adopts an innovative XY axis expandable design, the original engraving area is about 400x400mm, but you can purchase a Y-axis expansion kit to expand the engraving area to 935x400mm; purchase an XY-axis expansion kit to upgrade Up to 935x905mm engraving area, which can help you better handle large area engraving or cutting work.
6. Upgraded 32-bit air-assist motherboard: The latest 32-bit motherboard supports automatic air-assist control. Reserve Bluetooth, SD card offline printing function. (Upgrade Kit sold separately)
7. Industrial-grade cutting accuracy: S30 series adopts extremely solid and high-precision 0.005mm linear slide rail X-axis, making it reach industrial-grade engraving accuracy. When comparing small engraving details, the S30 series does not have the wavy pattern that appears in ordinary engraving machines.
SCULPFUN S30 Series-Revolutionary Innovation！Automatically controlled air assist system! S30 (5W), S30 Pro (10W), S30 Pro Max (20W) Features: 1. Automatically controlled air assist system: The traditional adapter air assist will always be turned on and cannot be controlled during engraving, and the engraved pattern will be smoked into a fuzzy fog. The S30 series is equipped with an airassist 32-bit
This video is about how to properly clean ZnSe Focal Lens for Trumpf CO2 Laser cutting machines.
This video is cnc machining tutorial.
We will focus on how to properly clean ZnSe Focal Lens for CO2 Laser cutting machine and how to avoid scratch.
If you have any comments or questions, please write them bellow.
Thank you
Petr
This video is about how to properly clean ZnSe Focal Lens for Trumpf CO2 Laser cutting machines. This video is cnc machining tutorial. We will focus on how to properly clean ZnSe Focal Lens for CO2 Laser cutting machine and how to avoid scratch. If you have any comments or questions, please write them bellow. Thank you Petr source
