Tag: Linear rails

CNC Milling Machine

DIY CNC Milling Machine Build (Part 15) – Mounting the Spindle, Machine Alignment and First Chips!

Seabass Engineering

March 8, 2023



This time I mount the spindle, wire in spindle control to the CNC controller, align the machine and finally make some chips!

Final part was made using a 10mm indexable insert style cutter, 20,000 RPM, 1.5mm DOC, 1400mm/m feed rate..

Enjoy!
_____________________________________
DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminium tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________

Music Credits
—————–
No Quarter – TechnoAXE

——————
Dark Vs. Light – TechnoAXE


source

This time I mount the spindle, wire in spindle control to the CNC controller, align the machine and finally make some chips! Final part was made using a 10mm indexable insert style cutter, 20,000 RPM, 1.5mm DOC, 1400mm/m feed rate.. Enjoy! _____________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling

CNC Milling Machine

DIY CNC Milling Machine Build (Part 9) NEMA34 Hybrid Stepper Motor X-Axis bracket

Seabass Engineering

February 22, 2023



In this episode I make the X Axis mounting plate for the NEMA 34 Hybrid (closed loop) stepper motor.
_____________________________________
DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminum tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________

Music Credit
—————–
No Quarter – TechnoAXE

——————
Dark vs. Light – – TechnoAXE

source

In this episode I make the X Axis mounting plate for the NEMA 34 Hybrid (closed loop) stepper motor. _____________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the

Metal CNC Machine

IndyMill – Open Source DIY CNC Machine #4 Final Test!

Nikodem Bartnik

February 8, 2023



After way too long incredibly satisfying build process it’s time to test the IndyMill! After finishing cable management I put my new CNC to a lot of tests with various materials and different settings.

Files, parts, everything else: https://indystry.cc/indymill
My store: https://indystry.cc/store/
Parts list: https://bit.ly/3hADutn
Build Instruction: https://gumroad.com/l/indymill

Support my projects on Patreon → https://www.patreon.com/nikodembartnik

It was a long journey! I am happy and sad at the same time that it’s the end of this project 🙁
But wait, is it? Of course not, it’s just the beginning, so many materials to test, so many things to make and so many ideas. I hope you enjoyed the series and that you will follow my new projects, there is some exciting stuff coming up! As always any feedback is highly appreciated 😀

#diycnc #indymill #cnc

source

After way too long incredibly satisfying build process it’s time to test the IndyMill! After finishing cable management I put my new CNC to a lot of tests with various materials and different settings. Files, parts, everything else: https://indystry.cc/indymill My store: https://indystry.cc/store/ Parts list: https://bit.ly/3hADutn Build Instruction: https://gumroad.com/l/indymill Support my projects on Patreon → https://www.patreon.com/nikodembartnik It was a long journey!

CNC Milling Machine

DIY CNC Milling Machine Build – (Part 5) – The Z Axis Column

Seabass Engineering

January 25, 2023



In this video I add some heavy duty castors to the steel frame and tack weld the Z column to the base plate.

______________________________________
DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminum tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________

Music credit…
––––––––––––––––––––––––––––––
Mood by Peyruis https://soundcloud.com/peyruis
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: https://bit.ly/al-mood
Music promoted by Audio Library https://youtu.be/dsdYAMcNcwI
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
Gonna Sing by Peyruis https://soundcloud.com/peyruis
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: https://bit.ly/peyruis_gonna-sing
Music promoted by Audio Library https://youtu.be/kPVJUD9Wo98
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
Spaceship by Lesion X https://soundcloud.com/lesionxbeats
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: https://bit.ly/lesion-x-spaceship
Music promoted by Audio Library https://youtu.be/-FrY1jeHB2s
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
Twenties by Peyruis https://soundcloud.com/peyruis
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: https://bit.ly/twenties-peyruis
Music promoted by Audio Library https://youtu.be/t9glFROS8-k
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
Cali by Wataboi https://soundcloud.com/wataboi
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: https://bit.ly/wataboi-cali
Music promoted by Audio Library https://youtu.be/qXptaqHIH5g
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
Tonight by Rexlambo https://soundcloud.com/rexlambo
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: http://bit.ly/-tonight
Music promoted by Audio Library https://youtu.be/Lct7aahfiMM
––––––––––––––––––––––––––––––

source

In this video I add some heavy duty castors to the steel frame and tack weld the Z column to the base plate. ______________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger

CNC Milling Machine

DIY CNC Milling Machine Build – (Part 1) – CNC Mill CAD design and the Y axis

Seabass Engineering

January 16, 2023



DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminum tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.

source

DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel. By using aluminum tool plate (which is in theory pre-machined flat) and bolting the critical

CNC Milling Machine

New Project! A much more capable CNC milling machine!

Chris DePrisco

January 12, 2023



If you want to help me create more, better quality videos faster, consider tossing a few bucks my way on Patreon: https://www.patreon.com/chrisdeprisco

I was getting tired of the limitations of my 3040 CNC already so I’ve started work on a much more capable CNC. The design isn’t finalized yet but I’m starting on it anyway!

Music by Zircon
http://zirconstudios.bandcamp.com/

source

If you want to help me create more, better quality videos faster, consider tossing a few bucks my way on Patreon: https://www.patreon.com/chrisdeprisco I was getting tired of the limitations of my 3040 CNC already so I’ve started work on a much more capable CNC. The design isn’t finalized yet but I’m starting on it anyway! Music by Zircon http://zirconstudios.bandcamp.com/ source