Tag: mach3

CNC Milling Machine

DIY CNC Milling Machine Build (Part 12) – Limit switches, Wiring and Drag Chain

Seabass Engineering

December 10, 2022



In this video I begin wiring up the machine, mounting the limit switches and attaching the drag chain for the X axis wiring.
_____________________________________
DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminum tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________

Music Credits
—————–
No Quarter – TechnoAXE

——————
Broken Toys – – TechnoAXE
Basic Metal 12 – – TechnoAXE
Machine Takeover – – TechnoAXE
Dark vs. Light – – TechnoAXE

source

In this video I begin wiring up the machine, mounting the limit switches and attaching the drag chain for the X axis wiring. _____________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger

CNC Milling Machine

CNC Milling Machine Build ( time-laps)

fixitdaz

December 3, 2022



—————————— Click “Show more” ————————————–
This is a 4 hr Build filmed using time-laps hope you enjoy it.
All that is left to do is wire the motors and build the control box then we can give it a test run.
Thanks for watching, Please like and add to Favourites, Don’t forget to hit the subscribe button

Thanks for watching, If you liked my videos and would like to Thank me you can make a donation @ http://goo.gl/GqtT4 or click the Show Your Support link, on are channel page and if you use bitcoins you can send us some bitcoins to 1MFGvF7NPaXC7RU5Trwo8z1dUbuowcuw5D Thanks for you support.

Music:Thought Police Free Music from: http://music4yourvids.co.uk
Licence summary: http://music4yourvids.co.uk/licence.html

source

—————————— Click “Show more” ————————————– This is a 4 hr Build filmed using time-laps hope you enjoy it. All that is left to do is wire the motors and build the control box then we can give it a test run. Thanks for watching, Please like and add to Favourites, Don’t forget to hit the subscribe button Thanks for watching,

CNC Plasma Cutter

Assembling a DIY CNC PLASMA TABLE | HOW MUCH DOES IT COST

The Off Road Corner

December 2, 2022



In this video I assemble my DIY CNC Plasma Table. I go over what components I am using to build it including CandCNC’s bladerunner kit and nema 23 stepper motors. this machine will be using a Hyperthem Powermax45 plasma cutter. the plans for this machine are to use to make fabricating custom brackets for the Cherokee easier. Links to the components I’m using are below. thanks for watching.

Bladerunner bundle – https://www.candcnc.net/store-home/bladerunner-dragon-cut-300-4-bundle/

Powermax45 plasma cutter w/cpc port – https://amzn.to/31Wp9j4

Cheap PC with paralell port and windows xp -https://www.ebay.com/itm/Dell-Optiplex-GX240-PC-Tower-P4-1-80GHz-512MB-RAM-20GB-HDD-Win-XP/333002506599?hash=item4d887f0167:g:aBgAAOSwbzxcmk2b

Gantry kit – https://www.ebay.com/itm/DIY-CNC-PLASMA-CUTTER-KIT-FOR-NEMA-23-STEPPER-MOTORS/163305262019?epid=884600534&hash=item2605c08bc3:g:Zu4AAMXQfFJRV0HI

Z-Axis – https://amzn.to/31PNPcZ

Gear rack – https://www.mcmaster.com/6295k233

VHB tape -https://amzn.to/32Ua7LZ

Micro switches – https://amzn.to/368KI3b

The Off Road Corner is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.

Music by:
Just the Banjo – Pearce Roswell
Every Single Day – Pearce Roswell
https://www.epidemicsound.com

109

source

In this video I assemble my DIY CNC Plasma Table. I go over what components I am using to build it including CandCNC’s bladerunner kit and nema 23 stepper motors. this machine will be using a Hyperthem Powermax45 plasma cutter. the plans for this machine are to use to make fabricating custom brackets for the Cherokee easier. Links to the

CNC Router

DIY CNC Router: First Movements and Other Projects

Radikult

December 1, 2022



I try to continue with the #DIY #CNC #Router but I have reach a stop, where I need to complete a few small projects in order to continue
Also the very first movements of the CNC (spoiler ends bad) in need of more testing and tuning
Here is where I got the extrusions and brackets and Linear stages
http://linearactuatormotorized.name/c141080_nsk_xy_vexta_motorized_ball_screw_linear_positioning_stage_415_x_425mm_2.htm
https://8020.net/
https://www.ebay.com/itm/Aluminum-extrusion-extruded-8020-channel-profile-t-slot/282320715397

Want to support the channel,——- by buying a reservoir you can help the channel grow and make you computer different

Visit My Official Website/Shop:
http://www.radikult-custom.com/

Ebay Store Reservoir Links:
https://www.ebay.com/itm/223299735167
https://www.ebay.com/itm/223273705318
https://www.ebay.com/itm/223233814756
https://www.ebay.com/itm/223233794652
Check the store for more options

Follow me : https://twitter.com/RadikultCustom
https://Instagram.com/radikultcustom
Or just leave me a comment below for any questions
Email me : [email protected]

source

I try to continue with the #DIY #CNC #Router but I have reach a stop, where I need to complete a few small projects in order to continue Also the very first movements of the CNC (spoiler ends bad) in need of more testing and tuning Here is where I got the extrusions and brackets and Linear stages http://linearactuatormotorized.name/c141080_nsk_xy_vexta_motorized_ball_screw_linear_positioning_stage_415_x_425mm_2.htm https://8020.net/

CNC Milling Machine

DIY CNC Milling Machine Build (Part 13) – Operators Panel and First Movements!

Seabass Engineering

December 1, 2022



In part 13:

– Wiring up the operators control panel
– Add an upper limit switch for the Z axis
– Add a pneumatic strut to support the Z
– First machine movements and backlash testing
_____________________________________
DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminium tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________

Music Credits
—————–
No Quarter – TechnoAXE

——————
Not According To Plan – TechnoAXE
Broken Toys – TechnoAXE
Dropped the E String – TechnoAxe

source

In part 13: – Wiring up the operators control panel – Add an upper limit switch for the Z axis – Add a pneumatic strut to support the Z – First machine movements and backlash testing _____________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling machine without the need for

CNC Milling Machine

DIY CNC Milling Machine Build (Part 14) Building a CNC enclosure with 3030 aluminium extrusion

Seabass Engineering

November 30, 2022



In this video I’ll be building the enclosure around the machine. I have used 3030 aluminium extrusion to construct the frame and 4mm polycarbonate for the doors and front panel. I used a cheaper (but arguably less safe) material for the sides where people are much less likely to be stood if a cutter tries to escape!

I also make some rail extensions and install bellows on the X and Y axes, as well as begin to mount the spindle clamp to Z axis.

In the next episode i’ll be mounting and wiring up the Chinese 3KW ER20 spindle!
_____________________________________
DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminium tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________

Music Credits
—————–
No Quarter – TechnoAXE

——————
Not According To Plan – TechnoAXE
Basic Metal 12 – TechnoAXE
Future Ghost – TechnoAXE

source

In this video I’ll be building the enclosure around the machine. I have used 3030 aluminium extrusion to construct the frame and 4mm polycarbonate for the doors and front panel. I used a cheaper (but arguably less safe) material for the sides where people are much less likely to be stood if a cutter tries to escape! I also make