April 21, 2023
Assembly Manual:
http://unik-openbuild.dk/img/cms/info%20iconer/Screw-Assembly-Manual.pdf
source
Assembly Manual: http://unik-openbuild.dk/img/cms/info%20iconer/Screw-Assembly-Manual.pdf source
April 10, 2023
source
March 8, 2023
This time I mount the spindle, wire in spindle control to the CNC controller, align the machine and finally make some chips!
Final part was made using a 10mm indexable insert style cutter, 20,000 RPM, 1.5mm DOC, 1400mm/m feed rate..
Enjoy!
_____________________________________
DIY CNC Milling machine build.
My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.
By using aluminium tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!
Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________
Music Credits
—————–
No Quarter – TechnoAXE
——————
Dark Vs. Light – TechnoAXE
source
This time I mount the spindle, wire in spindle control to the CNC controller, align the machine and finally make some chips! Final part was made using a 10mm indexable insert style cutter, 20,000 RPM, 1.5mm DOC, 1400mm/m feed rate.. Enjoy! _____________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling
February 22, 2023
In this episode I make the X Axis mounting plate for the NEMA 34 Hybrid (closed loop) stepper motor.
_____________________________________
DIY CNC Milling machine build.
My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.
By using aluminum tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!
Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________
Music Credit
—————–
No Quarter – TechnoAXE
——————
Dark vs. Light – – TechnoAXE
source
In this episode I make the X Axis mounting plate for the NEMA 34 Hybrid (closed loop) stepper motor. _____________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the
January 21, 2023
Alan talks about how he built his Home Built CNC bed mill equipped with ClearPath servos and Centroid Acorn CNC controller and got it all running well. Alan tired several other cnc controls systems using Mach3 and Mach4 with alot of frustration and then finally tried the new Centroid Acorn CNC controller in which he had success. He tells his story of his pitfalls so everyone can learn from them. He uses Fusion 360 and Renishaw Probe and Tool Touch off device with the Centroid CNC software running it all.
source
Alan talks about how he built his Home Built CNC bed mill equipped with ClearPath servos and Centroid Acorn CNC controller and got it all running well. Alan tired several other cnc controls systems using Mach3 and Mach4 with alot of frustration and then finally tried the new Centroid Acorn CNC controller in which he had success. He tells his
January 20, 2023
Home built CNC plasma cutter 2nd cut. I’m using a ShaoGe SMC4-4-16A16B Offline CNC controller
source
Home built CNC plasma cutter 2nd cut. I’m using a ShaoGe SMC4-4-16A16B Offline CNC controller source
