BOLT series fiber laser cutting machine is the most high-end metal laser cutting machine of PENTA LASER.
Penta Laser focus on R & D high power fiber laser cutting machine and BOLT is the first high-power over 10KW installed in several countries, now the power of this series can reach 20KW. And 70% of machine installation in domestic from PENTA LASER.
BOLT’s rapid speed can reach 200m/min with 4G max. acceleration. With Italian system; German laser source, cutting head; Japanese servo motor; Spanish nesting; American, French and Swiss
electrical parts, BOLT combines the leading components all over the world! From 2KW to 20KW, table size from 3m×1.5m to 12m×2.5m, feel free to choose what you need. Its superior dynamic performance is rooted in our leading technologies: Superfast+, IQ cutting, precision cutting, thick plate limit cutting, low-pressure N2 cutting, intelligent anti-collision, auto drift compensation…
For more information, please contact:
www.pentalaser.com/en
en.pentalaser.com [email protected]
+86(0)27 81736331
+86 159 7214 5556
BOLT series fiber laser cutting machine is the most high-end metal laser cutting machine of PENTA LASER. Penta Laser focus on R & D high power fiber laser cutting machine and BOLT is the first high-power over 10KW installed in several countries, now the power of this series can reach 20KW. And 70% of machine installation in domestic from PENTA
From http://www.kevincaron.com – Finally Kevin Caron takes the file he has been working on and makes some sparks cutting out a metal part on his CNC plasma cutting table ….
After creating the file and preparing it in SheetCam, Kevin Caron is finally ready to cut out his sculpture base using his Dynatorch Super B 4×4 plasma CNC cutting table.
Now it’s time to put the part, which Kevin Caron transferred to a thumb drive, into the computer and program that runs the CNC machine.
Before you open the program in the computer, you have to turn on the CNC plasma table. Once the table is on, the computer lets you know with a little sound.
Next you open the “Dynatorch SuperB CNC” program. You accept the little warning, then allow the machine to go through its warm up routine and the table homes itself. Then you open the file, so Kevin Caron opens the file of the base plate with its four bolt holes.
Before cutting out the base plate, though, Kevin Caron likes to do a dry run of the cut, just to make sure your metal plate is positioned properly on the sheet of metal. To do so, you make sure that your torch height control and the button that turns on the torch are “grayed out.” Then when you click on “Start cycle,” the program – and CNC table – will go through the motions without cutting.
Now Kevin Caron knows that that his sheet of 1/2″ steel is sitting in the right position. He has water in the table to cut down the smoke and dust. He’s got his ground attached and the plasma cutter is on and cranked up, so now it’s time to turn on the table and make some sparks!
He clicks on the two buttons that were grayed out (torch height control and plasma cutter activation). Then he clicks the “Start cycle” button and the table starts cutting the metal. It takes about 2:09 minutes to cut out the bolt holes and the plate itself.
Kevin Caron then uses his permanent lifting magnet and engine hoist to lift the base plate out of the metal and shows the edge. The cut is “as smooth as a baby’s butt,” Kevin Caron declares. He points to a little dross around the edge and says increasing the cutting speed a little might eliminate that.
The bolt holes look perfect.
Kevin Caron is ready to go back to work, so you have time to click on the “notification bell” in the upper righthand corner of the YouTube screen to be the first to know when he uploads a new video, and to visit http://www.kevincaron.com to see more how-to videos.
Well, you might want to stick around for another moment to see Kevin Caron flub his mother’s advice ….
“Inspired sculpture for public & private places.”
Artist Kevin Caron has been sculpting full time since 2006. See – and hear – his amazing metal and large format 3D-printed sculptures, which are found in public and private places coast-to-coast and online at http://www.kevincaron.com.
#FabricationTips #KevinCaronArt From http://www.kevincaron.com – Finally Kevin Caron takes the file he has been working on and makes some sparks cutting out a metal part on his CNC plasma cutting table …. After creating the file and preparing it in SheetCam, Kevin Caron is finally ready to cut out his sculpture base using his Dynatorch Super B 4×4 plasma CNC
①Auto loading&unloading available and cycling production with 0 waste
②400KG loading ability for chuck clamp
③9 meters tube support or tailored
④Special 3-Chuck design to achieve work efficiency
⑤Auto-center, tube type recognization & length detecting function
⑥Tailored chucks & clamping jigs available
Songu laser
Facebook: https://www.facebook.com/LaserSONGU/
Instagram: https://www.instagram.com/songulaser/
Official Website: http://songulaser.com/
E-mail: [email protected]
Whatsapp: 0086-13925892493
Address: No.189 Changjiang Rd, Taicang Port Economic & Technological Development Zone, Suzhou, Jiangsu, China
①Auto loading&unloading available and cycling production with 0 waste ②400KG loading ability for chuck clamp ③9 meters tube support or tailored ④Special 3-Chuck design to achieve work efficiency ⑤Auto-center, tube type recognization & length detecting function ⑥Tailored chucks & clamping jigs available Songu laser Facebook: https://www.facebook.com/LaserSONGU/ Instagram: https://www.instagram.com/songulaser/ Official Website: http://songulaser.com/ E-mail: [email protected] Whatsapp: 0086-13925892493 Address: No.189 Changjiang Rd, Taicang
LF1325LC laser cutting machine can process metal and non-metal materials at the same time, suitable for sheet metal cutting and stainless steel cutting. It is a more versatile machine which is widely used in many industries higher applicability. LF1325LC is equipped with both optical fiber laser and CO2 glass laser fiber laser source and CO2 being a powerful tool in many industries.
The world’s first technology that can cut metal and non-metal materials at the same time;
Equipped with CO2 laser tube, achieving a multi-purpose machine to help customers expand production;
World-class laser source and laser head brand with more stable performance;
Precision rail drive system and imported servo motor, higher configuration;
A new generation of bed manufacturing process and longer machine life;
New aviation aluminum beam, lighter weight, 2 times faster machine speed.
*Any questions contact Whatsapp: 86-15153118063*
LF1325LC laser cutting machine can process metal and non-metal materials at the same time, suitable for sheet metal cutting and stainless steel cutting. It is a more versatile machine which is widely used in many industries higher applicability. LF1325LC is equipped with both optical fiber laser and CO2 glass laser fiber laser source and CO2 being a powerful tool in
PENTA LASER dedicated in developing and manufacturing high power fiber laser machines. Feed back to customers with best technologies. Fiber laser cutting machines for sheet metal cutting, pipe cutting, tube cutting, metal welding and metal cleaning.
Higher Power for metal cutting: 2KW-40KW
Customized welding machine based on customer’s requirements: 1KW-6KW
Different model of laser cleaning machine for different application: 100W-2KW
More information please contact:
E-mail: [email protected] [email protected]
Office:
+86 (0)27 81736331
WhatsApp:
+86 159 7214 5556
Website:
https://www.pentalaser.com/en
https://en.pentalaser.com
PENTA LASER dedicated in developing and manufacturing high power fiber laser machines. Feed back to customers with best technologies. Fiber laser cutting machines for sheet metal cutting, pipe cutting, tube cutting, metal welding and metal cleaning. Higher Power for metal cutting: 2KW-40KW Customized welding machine based on customer’s requirements: 1KW-6KW Different model of laser cleaning machine for different application: 100W-2KW
