Tag: model engineering

CNC Router

Queenbee Pro CNC Router build part 1: First look at the machine

Off-Hours Engineering

January 9, 2023



It is finally time to give you the first look at the Queenbee Pro CNC router and continue the build. You will get my first impressions of the machine and a general review of the kit from Bulkman 3D as I start the assembly. You will see links to some of the Parts I’ve used down below.

And by the way check out my website https://ohengineering.se/

STEPPERONLINE Stepper Motor Driver 1.0-4.2A 20-50VDC – https://amzn.to/3bYJeND

STEPPERONLINE Switching Power Supply 115V/230V S-350-36 – https://amzn.to/3uCu5br

Arduino Nano – https://amzn.to/3unmehG

Arduino Nano Terminal Adapter Shield (Terminal Adapter 3pcs) – https://amzn.to/3vu0iTb

MUZHI SPDT Micro Switch 12 Pcs – https://amzn.to/3yEDQJn

Nema 23 Stepper Motor 4.2A 3.0Nm (425oz.in) – https://amzn.to/2TfJ8KU

Square Linear Guideway Rail HGH15-1000mm +2Pcs HGH15 – CA Carriage Block – https://amzn.to/3fJDwQA

C-Beam Linear Rail (40mm x 80mm) (Silver, 1000mm) – https://amzn.to/3yLIftO

ABB, AF16-30-10-13, 35 Amps, 100-250V AC/DC Coil, IEC Rated Contactor – https://amzn.to/3fq4QVh

If you like what you see, make sure to subscribe so you don’t miss any future updates and if you have any suggestions you can send me an E-mail at: [email protected] or leave a comment down below.

For more updates on what I’m up to between the the videos you can find me on instagram, just search for @offhoursengineering

source

It is finally time to give you the first look at the Queenbee Pro CNC router and continue the build. You will get my first impressions of the machine and a general review of the kit from Bulkman 3D as I start the assembly. You will see links to some of the Parts I’ve used down below. And by the

CNC Router

#MT47 Part 1 – Olivier CNC Router/Engraver. The Gantry. In 4K/UHD by Andrew Whale.

Learning Turning Metal - by Andrew Whale

December 4, 2022



Making a CNC Router/Engraver – designed by Olivier in France…….
In this video, part 1 of the series, I make a start on the gantry.

I can’t thank Olivier enough for all his hard work designing this machine.
There are over 30 pages of drawings!
These are avalable to purchase for £30.00 (UK£). To find out how to purchase the drawings, please email me at [email protected]

If you can offer me any help or advice, please leave a comment.
I hope some of my videos help inspire others to venture into model engineering.
If you would like to keep informed of my new videos, please subscribe.
If you find my videos of value you could always help me continue making them by making a small donation at:
paypal.me/AndrewWhale
If you have any private questions/advice you can contact me via email at [email protected]
Cheers!

Backing track credits……
Music: (intro) Water Lily by the 126ers – YouTube Audio Library

WARNING: Metal turning can be dangerous! I am not sure whether the methods I use are established ones, and I do not recommend them.
Please do not copy me without doing your own risk assessments!
You are responsible for your safety – not me!

source

Making a CNC Router/Engraver – designed by Olivier in France……. In this video, part 1 of the series, I make a start on the gantry. I can’t thank Olivier enough for all his hard work designing this machine. There are over 30 pages of drawings! These are avalable to purchase for £30.00 (UK£). To find out how to purchase the