Tag: nema34

CNC Milling Machine

DIY CNC Milling Machine Build (Part 7) – Z Axis Construction

Seabass Engineering

December 4, 2022



This time I’m building the Z axis and mounting it to the column. I’m probably going to regret saying this, but hopefully this concludes the majority of the locating, drilling and tapping of holes.
______________________________________
DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminum tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________

Music Credit
—————–
No Quarter – TechnoAXE

——————
Dark vs. Light – – TechnoAXE

source

This time I’m building the Z axis and mounting it to the column. I’m probably going to regret saying this, but hopefully this concludes the majority of the locating, drilling and tapping of holes. ______________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling machine without the need for any machining

CNC Milling Machine

DIY CNC Milling Machine Build – (Part 3) – Screwing around!

Seabass Engineering

December 1, 2022



This time I screw with my balls…

This video covers the installation of the ball screws and ball nuts.

______________________________________
DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminum tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________

Music credit…

––––––––––––––––––––––––––––––
Cali by Wataboi https://soundcloud.com/wataboi
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: https://bit.ly/wataboi-cali
Music promoted by Audio Library https://youtu.be/qXptaqHIH5g
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
Summer Madness by Roa https://soundcloud.com/roa_music1031
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: http://bit.ly/l-summer-madness
Music promoted by Audio Library https://youtu.be/onA7Si-1Py4
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
Relax by Markvard https://soundcloud.com/markvard
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: http://bit.ly/al-relax
Music promoted by Audio Library https://youtu.be/O1TefQahcHg
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
Night Out by LiQWYD https://soundcloud.com/liqwyd
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: http://bit.ly/2BLdhW5
Music promoted by Audio Library https://youtu.be/tut9O8uaJho
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
All Night by Ikson https://soundcloud.com/ikson
Music promoted by Audio Library https://youtu.be/bE2rrcUKnok
––––––––––––––––––––––––––––––

source

This time I screw with my balls… This video covers the installation of the ball screws and ball nuts. ______________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the

CNC Milling Machine

DIY CNC Milling Machine Build (Part 13) – Operators Panel and First Movements!

Seabass Engineering

December 1, 2022



In part 13:

– Wiring up the operators control panel
– Add an upper limit switch for the Z axis
– Add a pneumatic strut to support the Z
– First machine movements and backlash testing
_____________________________________
DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminium tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________

Music Credits
—————–
No Quarter – TechnoAXE

——————
Not According To Plan – TechnoAXE
Broken Toys – TechnoAXE
Dropped the E String – TechnoAxe

source

In part 13: – Wiring up the operators control panel – Add an upper limit switch for the Z axis – Add a pneumatic strut to support the Z – First machine movements and backlash testing _____________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling machine without the need for

CNC Milling Machine

DIY CNC Milling Machine Build (Part 14) Building a CNC enclosure with 3030 aluminium extrusion

Seabass Engineering

November 30, 2022



In this video I’ll be building the enclosure around the machine. I have used 3030 aluminium extrusion to construct the frame and 4mm polycarbonate for the doors and front panel. I used a cheaper (but arguably less safe) material for the sides where people are much less likely to be stood if a cutter tries to escape!

I also make some rail extensions and install bellows on the X and Y axes, as well as begin to mount the spindle clamp to Z axis.

In the next episode i’ll be mounting and wiring up the Chinese 3KW ER20 spindle!
_____________________________________
DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminium tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________

Music Credits
—————–
No Quarter – TechnoAXE

——————
Not According To Plan – TechnoAXE
Basic Metal 12 – TechnoAXE
Future Ghost – TechnoAXE

source

In this video I’ll be building the enclosure around the machine. I have used 3030 aluminium extrusion to construct the frame and 4mm polycarbonate for the doors and front panel. I used a cheaper (but arguably less safe) material for the sides where people are much less likely to be stood if a cutter tries to escape! I also make

CNC Milling Machine

How to build A CNC machine _ DIY CNC mill

VinceBuild

November 7, 2022



This is full video on how to build CNC machine at home. This CNC mill is very rigid it has very high accuracy. It has zero backlash.

Here are some info on build.

Build time: About 500 hours.
Build cost: About $4500

Travels:
Z : 11″ ( 27.9 cm )
X: 22″ (55.88 cm)
Y: 12″ (30.48cm)

Spindle:
5.5 KW ATC BT30 18000RPM from Ebay. ( very happy with it) seller is super nice guy.

https://www.ebay.ca/itm/Combo-ATC-tool-change-spindle-motor-BT30-5-5kw-18k-rpm-VFD-NBT30/184223154689?hash=item2ae48e4201:g:XTQAAOSwPdhdOt~h

Electronics:

BOB: PMDX 424. https://www.pmdx.com/PMDX-424
Spindle speed control: PMDX 407. https://www.pmdx.com/PMDX-407
Stepper motors : Nema 34 1275oz-in
Drivers: DM860d from Ebay

Software:
Mach4.

Mach4-Hobby

Rails:
20 mm Raills for X,Y and Z

Ball screws:
Y ball screw is 20mm
X Z ball screws are 16mm

Couplings:
Bellows style Ruland coupling with zero backlash .
https://www.ruland.com/servo-couplings/bellows-couplings.html.

Frame:
Y Axis
24″ x 14″ X 4″( 64 X 35.5 X 10.1 cm )
Material 1.25″ X 4″ ( 3.1 X 10.1cm )steel

X Axis
35″ X 11″ ( 88 X 28 cm )
Material .500″ (12.7mm) base plate
1.25″ X 3″ walls

Z column
35″ x 8″ X 4″ ( 88.9 X20.3 X 10.1 cm) tube with .500″ (12.7mm) wall thikness
filled with cement.

Enclosure:
Aluminum sheet and angle.

source

This is full video on how to build CNC machine at home. This CNC mill is very rigid it has very high accuracy. It has zero backlash. Here are some info on build. Build time: About 500 hours. Build cost: About $4500 Travels: Z : 11″ ( 27.9 cm ) X: 22″ (55.88 cm) Y: 12″ (30.48cm) Spindle: 5.5 KW

CNC Milling Machine

DIY CNC Milling Machine – The Complete Build Video

Seabass Engineering

November 1, 2022



DIY CNC Milling machine build.

My objective for this project was to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminium tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.

source

DIY CNC Milling machine build. My objective for this project was to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel. By using aluminium tool plate (which is in theory pre-machined flat) and bolting the critical