This is the Crossfire CNC plasma table from Langmuir systems.
Here’s a affiliate link to the Crossfire website if you are interested in checking out the table
http://store.langmuirsystems.com/?aff=16
Don’t forget to use the promo code MIKEFESTIVA this will save you $100 at checkout on the table!
It’s a surprisingly affordable 2×2 table at $1500, I added the optional XL table extension for $150 and the optional stainless steel water table for another $150 but for $1800 it’s really a quality table!
Disclaimer: Important Safety Information
Your plasma cutter power supply will expose you to high voltage and high amperage electrical components. It is your responsibility to make sure that all work is done safely and with the power disconnected. If you have any doubts regarding your ability to safely perform this work, you should consult the services of a professional electrician. Mike Festiva will not be held responsible for any injury or death resulting from the incorrect or unsafe execution of this procedure.
This is the Crossfire CNC plasma table from Langmuir systems. Here’s a affiliate link to the Crossfire website if you are interested in checking out the table http://store.langmuirsystems.com/?aff=16 Don’t forget to use the promo code MIKEFESTIVA this will save you $100 at checkout on the table! It’s a surprisingly affordable 2×2 table at $1500, I added the optional XL table
I thought I’d make a quick video about the Arduino based CNC Plasma cutter that I made in the farm workshop.
EM interference was a major issue however, to overcome this I;
Used shielded wiring
Installed a stainless steel water bed
Put ferrite magnets everywhere
Earthed everything I could
Major parts include;
Arduino UNO
CNC shield V3
1.9Nm Nema 23 Stepper motors (2.8A)
24V Power supply
DM542T Stepper driver
HIWIN HGH15 linear rail (A must have item for an accurate system in my opinion)
5V 1 channel Relay Module with Optocoupler (For on/off plasma arc)
“Tool Mate” Plasma clean from Hare and Forbes Machinery House
Software im using;
Arduino IDE for flashing the arduino
Fusion 360
Universal G-code sender
Post Processor: https://gist.github.com/michahump/8a2fc584ac653bd8bd72bc5547a89862
I thought I’d make a quick video about the Arduino based CNC Plasma cutter that I made in the farm workshop. EM interference was a major issue however, to overcome this I; Used shielded wiring Installed a stainless steel water bed Put ferrite magnets everywhere Earthed everything I could Major parts include; Arduino UNO CNC shield V3 1.9Nm Nema 23
The Hynade CUT60DN is a free hand plasma cutter but with the added features of plug and play CNC connections.
Not all plasma cutters are created equally, most cutters produce high frequency interference that can damage CNC equipment, the CUT60DN is a blow back pilot arc start and is designed to work with most CNC plasma cutters.
If you are interested in a Crossfire CNC table I definitely recommend considering this plasma as a great affordable plasma cutter for your table.
*This is the Crossfire CNC plasma table from Langmuir systems*
Here’s an affiliate link to the Crossfire website if you are interested in checking out the table
http://store.langmuirsystems.com/?aff=16
Don’t forget to use the promo code MIKEFESTIVA this will save you $100 at checkout on the table!
*Link to videos mentioned in this video*
Crossfire PRO CNC plasma table from Langmuir systems https://youtu.be/EMJFn1tOgh0
DIY plasma cutting table https://youtu.be/yJ8M_CXbzoo
Magnetic Chuck Grinding Station https://youtu.be/o-t046dVXEw
*Amazon Paid Affiliate Links Below:*
Use the Hynade Amazon Promo code 05MIKEWELD at checkout and save 5% on selected Hynade produces.
The Hynade CUT60DN CNC Blow back pilot arc plasma https://amzn.to/3G3oxhj *(This is the one in the video)*
The Hynade CUT80 Plasma Cutter https://amzn.to/3wqpP2F
Plasma Consumables for CUT60DN https://amzn.to/3Myn1Gu
The Hynade AC/DC 200amp Tig Welder https://amzn.to/3Ltk9ta
Amp Foot Petal for Hynade Tig 200 https://amzn.to/384nXU0
Shop Fox M1011 24-Inch Box and Pan Brake- https://amzn.to/3lsz9g5
Flame Resistant Welding Sleeves https://amzn.to/307x9D0
Miller ML00895 Lpr-100 Respirator https://amzn.to/3yabsP6
YESWELDER Auto Darkening Welding Helmet https://amzn.to/3oAD78J
Shade 5 Plasma Glasses https://amzn.to/3y7oVaB
*Here’s a paid affiliate link to Yeswelder website*
YESWELDER LINK: https://yeswelder.com/?ref=s6nzvjxbwejy
SAVE 10% on your entire order! Use Promo code MIKEFESTIVA and it helps me out a little bit too ?
You can find auto dim helmets here.
The Hynade CUT60DN is a free hand plasma cutter but with the added features of plug and play CNC connections. Not all plasma cutters are created equally, most cutters produce high frequency interference that can damage CNC equipment, the CUT60DN is a blow back pilot arc start and is designed to work with most CNC plasma cutters. If you are
This video is an interview with Phantom CNC Systems co-owner Steve Wallace, the designer of the Phantom CNC routers CNC plasma cutters.
All Phantom CNC machines, including the CNC routers and Plasma cutters (and the machines that are coming,) are all 220 volt single phase.
The unit I purchased was the Phanton CNC SCV 4×4. to see the cost, visit Phantom CNC Systems listed below. Some machines require quotes. If you want a quote, request one from the Phantom CNC website.
Phantom CNC Systems website → https://www.phantomcncsystems.com/
Learnyourcnc is a well-built training program for designing and more → https://www.learnyourcnc.com/
***Kyle @learnyourcnc on Instagram
OTHER ‘MUST HAVES’ FOR CNC ROUTERS
→ Calipers: https://amzn.to/338MAt3
→ Hearing protection (plugs don’t work): https://amzn.to/2Hs1RgW
——————————————————
Recommended Design Software
→ Vcarve Pro (RECOMMENDED)→ https://bit.ly/3d4WrEU
→ Vcarve Desktop → https://bit.ly/3D4CwjH
→ Vectric Aspire → https://shrsl.com/37pw9
→ Cut2D Desktop → https://shrsl.com/36xfm
→ Carveco (budget) → https://bit.ly/37rhVbY
___________________________
Starbond CA Glue Products
GET 10% OFF when you use this discount code: IDCWOODCRAFT
Starbond link: https://bit.ly/3g81RRU
———————————————
_____________________________
MAKING MONEY WITH A CNC
Words are the top-selling items of all time with CNC products. Get the free WORDS THAT SELL list: https://idcwoodcraft.com/cnc-lp-1/
Join CNC ENTREPRENEURS Facebook group: https://www.facebook.com/groups/cncentrepreneurs
——————————————————
CNC FREE STUFF AND MORE
CNC Insiders sign up (free files and more): https://idcwoodcraft.com/cnc-lp2-free-files/
——————————————————
NEW TO CNC OR STUCK IN A PROJECT?
Schedule one-on-one time with me: https://idcwoodcraft.com/for-beginners/
——————————————————
PLAYLISTS
CNC FOR BEGINNERS: https://bit.ly/3rg4WTl
CNC ENTREPRENEURS: https://bit.ly/3mxz6Ok
VECTRIC VCARVE & ASPIRE TUTORIALS FOR BEGINNERS: https://bit.ly/3pdmFsi
——————————————————
If you currently own a CNC router, please take a moment to take this survey to share your experience with it: https://bit.ly/3r5XzNh
——————————————————
Please support IDC Woodcraft Youtube channel:
Buy me a cup of coffee: https://www.buymeacoffee.com/garrettfromme
——————————————————
Cool vector files for CNC router & CNC laser: https://etsy.me/3oxX79l
——————————————————
CNC FOR BEGINNERS PODCAST: https://anchor.fm/cnc-for-beginners
——————————————————
Garrett Fromme
Facebook: https://fb.me/IDCWoodcraft
Website: www.idcwoodcraft.com
Email: [email protected]
This video is an interview with Phantom CNC Systems co-owner Steve Wallace, the designer of the Phantom CNC routers CNC plasma cutters. All Phantom CNC machines, including the CNC routers and Plasma cutters (and the machines that are coming,) are all 220 volt single phase. The unit I purchased was the Phanton CNC SCV 4×4. to see the cost, visit
➤Kindle Unlimited Membership Plans : https://geni.us/rFiFxJA
➤Audible Gift Memberships : https://geni.us/3c0cmi
➤Join Amazon Family 30-Day Free Trial : https://geni.us/QTGiQg
➤Join Amazon Prime Music 30-Day Free Trial : https://geni.us/oDr2O
➤Prime Student 6-month Trial : https://geni.us/6Qlnpul
➤Try Amazon Prime 30-Day Free Trial : https://geni.us/DW1tlti
➤Give the Gift of Amazon Prime : https://geni.us/uLQVIpd
➤Create an Amazon Wedding Registry : https://geni.us/svSjAP
➤Create an Amazon Baby Registry : https://geni.us/pPXj3W
➤Top Rated Products : https://geni.us/vBXiw
➤Most Wished For Items : https://geni.us/eAB2
➤Top Gift Ideas : https://geni.us/44IDOml
➤Hot New Releases : https://geni.us/vuWh
➤Gold Box :https://geni.us/Cx160C0
➤Best Selling Products : https://geni.us/TI843SA
➤Gift Cards for Weddings : https://geni.us/qYs7Z
─────── ❏ Business Inquiries ❏ ─────────
If you would like to promote your own product, or for any other business inquiries, please contact us at?Email: [email protected]
What are the Best Cnc Plasma Cutters in 2022?
In today’s video we reviewed the top 5 best Cnc Plasma Cutters on the market in 2022. We made this list based on our personal opinion and we ranked them in no particular order, after doing our research based on their prices, quality, durability, brand reputation and many more.
After watching this video you will know which are the best budget, top selling and top rated Cnc Plasma Cutters on the market today.
If you choose from this list you can be sure that you buy one of the best Cnc Plasma Cutter available today.
✅ Subscribe Now: https://tinyurl.com/1fh7px5m
Thanks for watching guys, I hope you liked this video.
Is this video making value to your search? If Yes please remember to leave a like and subscribe to my channel to see more videos like this in the future, and if you have any questions related to the products we listed here, leave a comment down below and I will get back to you as soon as I can.
►Best Leather Work Gloves
https://youtu.be/bAepvge4R-c
►Best Electric Snow Shovel
https://youtu.be/5J5ls6fHDZE
►Best Wood Moisture Meter
https://youtu.be/Pc_fn0sPJDM
►Best Drill Press for Metal
https://youtu.be/i04seINAIt0
FTC Disclosure: “Tool Box” is a participant of Amazon Affiliate Program. Provided Amazon product links are linked to my Amazon Affiliate account & I receive small commissions from every successful purchase made using these links.
This supports the channel to run and adds no extra cost to you as a customer.
Portions of footage found in this video are not original content produced by Outdoor Gear team. Portions of stock footage of products were gathered from multiple sources including, manufactures, fellow creators and various other sources.
COPYRIGHT ISSUE: If you can find any copyright infringement then send us an email. All rights reserved by respective owners.
Please Don’t Forget to subscribe to my channel for future Videos.
✅ Subscribe To Our Channel: https://tinyurl.com/1fh7px5m
