Tag: plasmacam

CNC Plasma Cutter

Homemade Tubing Bender Dies from the CNC Plasma Cutter

Antics Garage

April 28, 2023



We have a handy little metal bender in the shop, but it really only works well for flat bar and strap. We need to bend some tubing for an upcoming project, so we decided to make our own tubing bender dies, using the CNC plasma cutter. Is it very practical? No. Is it easy to set up? Not really. Is it easy to use? Not by a long shot. But does it work? Yes it does!

Okay, I know it’s silly to assume that having a CNC plasma cutter is an easy, cheap alternative to buying a set of dies. And we agree, this is kind of a useless project unless you have access to the proper tools. However, we were just curious if stacked layers would actually produce a useable result, and it totally did! In fact, this could be used as proof-of-concept for building an entire bending machine using nothing but the plasma table. That might be worth exploring in the future.

source

We have a handy little metal bender in the shop, but it really only works well for flat bar and strap. We need to bend some tubing for an upcoming project, so we decided to make our own tubing bender dies, using the CNC plasma cutter. Is it very practical? No. Is it easy to set up? Not really. Is

CNC Plasma Cutter

CNC Plasma Table Build Day five (welding water bed)

Maker Table

April 12, 2023



*Subscribe* Welding out the bottom of the water bed, it better not leak! The plasma table kit from precision plasma is almost finished. Then we can move to the candcnc electronics in our diy cnc plasma table build.

Amazon Tool List: https://amzn.to/2HbT2qo

Etsy: https://www.etsy.com/ca/shop/makertable?ref=hdr_shop_menu

Website: http://www.MakerTable.com

Facebook: https://www.facebook.com/makertable1776/
Instagram: https://www.instagram.com/maker.table/
Snapchat: https://www.snapchat.com/add/maker-table

source

*Subscribe* Welding out the bottom of the water bed, it better not leak! The plasma table kit from precision plasma is almost finished. Then we can move to the candcnc electronics in our diy cnc plasma table build. Amazon Tool List: https://amzn.to/2HbT2qo Etsy: https://www.etsy.com/ca/shop/makertable?ref=hdr_shop_menu Website: http://www.MakerTable.com Facebook: https://www.facebook.com/makertable1776/ Instagram: https://www.instagram.com/maker.table/ Snapchat: https://www.snapchat.com/add/maker-table source

CNC Plasma Cutter

Back to Basics – CNC Plasma Cutting

Tom Zelickman

April 4, 2023



This week our docket was full up with CNC plasma work for other fabricators and a sign for a local business. Finally getting the shop reopened and firing on all cylinders again.

For those interested in the coffee I mentioned today, please check out the website @ http://www.sludgecoffeeroaster.com

Sincerely,
Tom

source

This week our docket was full up with CNC plasma work for other fabricators and a sign for a local business. Finally getting the shop reopened and firing on all cylinders again. For those interested in the coffee I mentioned today, please check out the website @ http://www.sludgecoffeeroaster.com Sincerely, Tom source

CNC Plasma Cutter

Revolutionary New Vertical CNC Plasma Table

BurnTables CNC

January 7, 2023



BurnTables.com Vertical CNC Plasma Table is the cool new tool on the block. Saves Space, great for garages and shops with limited space, with this awesome machine you can have your man cave too! 5×5 Cutting Surface, 65 amp ESAB Plasma Torch

source

BurnTables.com Vertical CNC Plasma Table is the cool new tool on the block. Saves Space, great for garages and shops with limited space, with this awesome machine you can have your man cave too! 5×5 Cutting Surface, 65 amp ESAB Plasma Torch source

CNC Plasma Cutter

CNC Plasma Table Build (Install Drain)

Maker Table

January 2, 2023



*SUBSCRIBE* More progress on the CNC Plasma Table Build. Today I installed the drain for the water bed. This is my second attempt at getting a drain installed. You can find the fail in an earlier build video. This table is built from a precision plasma gantry kit combined with a candcnc electronics package and a Hypertherm Plasma cutter.

Etsy: https://www.etsy.com/ca/shop/makertable?ref=hdr_shop_menu

Website: http://www.Maker-Table.com

Facebook: https://www.facebook.com/makertable1776/
Instagram: https://www.instagram.com/maker.table/
Snapchat: https://www.snapchat.com/add/maker-table

source

*SUBSCRIBE* More progress on the CNC Plasma Table Build. Today I installed the drain for the water bed. This is my second attempt at getting a drain installed. You can find the fail in an earlier build video. This table is built from a precision plasma gantry kit combined with a candcnc electronics package and a Hypertherm Plasma cutter. Etsy: