May 9, 2023
How to Replace the Laser Tube for ChinaCNCzone CO2 Laser Engraving Machine
http://www.china-cncrouter.com/products/Laser-Engraving-Machine.htm
source
How to Replace the Laser Tube for ChinaCNCzone CO2 Laser Engraving Machine http://www.china-cncrouter.com/products/Laser-Engraving-Machine.htm source
February 20, 2023
Welcome to oree laser’s class. Today we will introduce to you how to maintain the laser head daily?
1.Turn off the laser device, loosen the screws.
2.Seal with pre-prepared tape to prevent dust from entering.
3.Check if there are black spots or oil stains on the lens.
4.When replacing the lens, first remove the pressure pad above the lens.
5.Then take out the broken lens. (Note: Do not touch the surface of the lens when taking the lens, and do not touch the lens when placing the lens)
6.Cover the pressure pad.
7.Lens replacement completed.
8.Check again whether the replaced lens is clean.
9.Tighten the screws.
This realizes the replacement of the protective lens. This is the end of the knowledge of protective mirror replacement. If you have any questions, feel free to contact us. I will continue to talk about more knowledge in the next issue.
source
Welcome to oree laser’s class. Today we will introduce to you how to maintain the laser head daily? 1.Turn off the laser device, loosen the screws. 2.Seal with pre-prepared tape to prevent dust from entering. 3.Check if there are black spots or oil stains on the lens. 4.When replacing the lens, first remove the pressure pad above the lens. 5.Then
February 19, 2023
My New GoFabcnc I got Dec 2019 worked great for 2 months !! Then they came out with new software we had to update to ! That software was nothing but junk. torch would come down hit metal, almost breaking my torch. It ended up blowing my 80 amp Plasma cutter, due to contacting metal. Plasma guy, sent me a Brand new one ! I had no choice but to build my own controls After going with MyPlasm board with THC, and Automation Drivers, and 2 48 volt power supplies, and new Z axis, and a new Hypertherm 45XP, It was cutting flawless ! but GoFab table are known for Sawtooth cuts, and I still have that. So I’m building my own table with the best parts out there.
My Facebook Site.
https://www.facebook.com/profile.php?id=100057341353859
source
My New GoFabcnc I got Dec 2019 worked great for 2 months !! Then they came out with new software we had to update to ! That software was nothing but junk. torch would come down hit metal, almost breaking my torch. It ended up blowing my 80 amp Plasma cutter, due to contacting metal. Plasma guy, sent me a
Help support FREE industrial education by purchasing the products shown in our videos at: https://rebrand.ly/TiStoreBOOM. Easy purchasing, at a fair price.
FREE CNC Machining Academy:
https://rebrand.ly/TiAcademy
FREE Aerospace Academy:
https://rebrand.ly/TiAero
Subscribe for daily content and expert knowledge: https://rebrand.ly/SUBTITANS
___
___
FREE CNC Machining Academy. Join the Revolution:
https://rebrand.ly/TiAcademy
Follow us on Instagram:
https://rebrand.ly/TiINSTA
Like us on Facebook:
https://rebrand.ly/TiFACEBOOK
Join the conversation on our Facebook Group:
https://rebrand.ly/TiFBGroup
Connect with us on LinkedIn:
https://rebrand.ly/TiLINKEDIN
Follow our CEO, Titan Gilroy:
https://rebrand.ly/TitanGilroy
___
___
THANK YOU to our Partners who make this content possible:
Kennametal – https://rebrand.ly/TiKennametal
Doosan – https://bit.ly/DoosanTiYT
United Grinding – https://rebrand.ly/TiGrinding
Mastercam – https://rebrand.ly/MastercamEDUTiYT
Blaser Swisslube – https://rebrand.ly/TiBlaser
Tormach – https://rebrand.ly/TiTormach
Solidworks – https://rebrand.ly/TiSLDWRKS20
Trumpf – https://rebrand.ly/TiTRUMPF2022
Trumpf TruMark – https://rebrand.ly/TiTRUMPFTruMark
Trumpf TruPrint – https://rebrand.ly/TiTruPrint
Markforged – https://rebrand.ly/TITAN-Markforged
Tyrolit – https://rebrand.ly/TITAN-Tyrolit
Mitutoyo – https://rebrand.ly/TiMitutoyo
Haimer – https://rebrand.ly/TiHAIMER
LNS – https://rebrand.ly/TITAN-LNS
FANUC America – https://rebrand.ly/TiFanuc
Schunk – https://rebrand.ly/TiSchunk
#CNC #Machining #Machinist
source
Help support FREE industrial education by purchasing the products shown in our videos at: https://rebrand.ly/TiStoreBOOM. Easy purchasing, at a fair price. FREE CNC Machining Academy: https://rebrand.ly/TiAcademy FREE Aerospace Academy: https://rebrand.ly/TiAero Subscribe for daily content and expert knowledge: https://rebrand.ly/SUBTITANS ___ ___ FREE CNC Machining Academy. Join the Revolution: https://rebrand.ly/TiAcademy Follow us on Instagram: https://rebrand.ly/TiINSTA Like us on Facebook: https://rebrand.ly/TiFACEBOOK Join the
