Tag: servos

CNC Milling Machine

Home Built CNC Milling Machine, Centroid, ClearPath servos, Probing, Fusion 360

CentroidCNC

January 21, 2023



Alan talks about how he built his Home Built CNC bed mill equipped with ClearPath servos and Centroid Acorn CNC controller and got it all running well. Alan tired several other cnc controls systems using Mach3 and Mach4 with alot of frustration and then finally tried the new Centroid Acorn CNC controller in which he had success. He tells his story of his pitfalls so everyone can learn from them. He uses Fusion 360 and Renishaw Probe and Tool Touch off device with the Centroid CNC software running it all.

source

Alan talks about how he built his Home Built CNC bed mill equipped with ClearPath servos and Centroid Acorn CNC controller and got it all running well. Alan tired several other cnc controls systems using Mach3 and Mach4 with alot of frustration and then finally tried the new Centroid Acorn CNC controller in which he had success. He tells his

CNC Router

DIY CNC Router: First Movements and Other Projects

Radikult

December 1, 2022



I try to continue with the #DIY #CNC #Router but I have reach a stop, where I need to complete a few small projects in order to continue
Also the very first movements of the CNC (spoiler ends bad) in need of more testing and tuning
Here is where I got the extrusions and brackets and Linear stages
http://linearactuatormotorized.name/c141080_nsk_xy_vexta_motorized_ball_screw_linear_positioning_stage_415_x_425mm_2.htm
https://8020.net/
https://www.ebay.com/itm/Aluminum-extrusion-extruded-8020-channel-profile-t-slot/282320715397

Want to support the channel,——- by buying a reservoir you can help the channel grow and make you computer different

Visit My Official Website/Shop:
http://www.radikult-custom.com/

Ebay Store Reservoir Links:
https://www.ebay.com/itm/223299735167
https://www.ebay.com/itm/223273705318
https://www.ebay.com/itm/223233814756
https://www.ebay.com/itm/223233794652
Check the store for more options

Follow me : https://twitter.com/RadikultCustom
https://Instagram.com/radikultcustom
Or just leave me a comment below for any questions
Email me : [email protected]

source

I try to continue with the #DIY #CNC #Router but I have reach a stop, where I need to complete a few small projects in order to continue Also the very first movements of the CNC (spoiler ends bad) in need of more testing and tuning Here is where I got the extrusions and brackets and Linear stages http://linearactuatormotorized.name/c141080_nsk_xy_vexta_motorized_ball_screw_linear_positioning_stage_415_x_425mm_2.htm https://8020.net/