Alpha CNC plasma cutter AP1530
www.alphacnc.com.au
please email: [email protected] if you have any questions.
source
Alpha CNC plasma cutter AP1530 www.alphacnc.com.au please email: [email protected] if you have any questions. source
Tag: torch
CNC Step router / plasma cutter in action with our automatic torch height controller (THC). Using the Hypertherm Powermax range of Plasma cuttters we have a complete system ready to use in any workshop.CNC routing, milling, plasma cutting, engraving, laser and more all on one machine. Visit www,cnc-step.co.za
source
CNC Step router / plasma cutter in action with our automatic torch height controller (THC). Using the Hypertherm Powermax range of Plasma cuttters we have a complete system ready to use in any workshop.CNC routing, milling, plasma cutting, engraving, laser and more all on one machine. Visit www,cnc-step.co.za source
Magnetic break away torch mount CNC plasma table build
Mike G
February 23, 2023
This is the magnetic breakaway torch mount I fabbed up today for the plasma table. It holds perfectly unitil it comes across an obstacle on the table, then it breaks away safely. Has 2 locator pins so it just snaps back into place in seconds, and will make changing consumables a breeze!
source
This is the magnetic breakaway torch mount I fabbed up today for the plasma table. It holds perfectly unitil it comes across an obstacle on the table, then it breaks away safely. Has 2 locator pins so it just snaps back into place in seconds, and will make changing consumables a breeze! source
LowRider 3 CNC Plasma Table PART 1 – floating Z torch mount
Design8Studio Doug Joseph
February 22, 2023
LowRider 3 CNC Plasma Table PART 1 – floating Z torch mount – uploaded August 15, 2022.
Links of interest:
• V1 Engineering – LowRIder v3 — https://docs.v1engineering.com/lowrider/
• My thread on V1E forum about my LR3 Plasma Cutting Table — LowRider 3 – Plasma Build “On a Budget” – Clarksburg, WV — https://forum.v1engineering.com/t/lowrider-3-plasma-build-on-a-budget-clarksburg-wv/33849
The latest printable files of the torch mount are available here: https://www.printables.com/model/274084-lowrider-3-cnc-plasma-torch-mount-with-floating-z-
Printables.com COLLECTION of parts for the LowRider 3 CNC PLASMA Cutting Table: https://www.printables.com/social/127223-doug-joseph-design8studio/collections/227396
The first six (6) videos of this series are part of a playlist devoted to the torch mount. The playlist is available here: https://www.youtube.com/watch?v=MV-IcyFUPQs&list=PLiW6LQZxE6JaOT7bpK6Z6k35rYtBaWuFp
Amazon affiliate links to products as shown in video series:
— CUT60DN Plasma Cutter: https://amzn.to/3LvjQQg
— Consumables for CUT60DN: https://amzn.to/3BT0EbE
— PTM80 Machine Torch for CUT60DN: https://amzn.to/3LvIRL8
— Consumables for PTM80: https://amzn.to/3Uqrhfi
• MGN12H Linear Rail Bearing Sliding Block Match use with MGN12 Linear Guide for CNC xyz DIY Engraving Machine (200mm, H-Type) — https://amzn.to/3PF7TId
• End-stop I used for floating Z — from a set of 6 high-quality end-stop switches that came included with an Emergency Stop button I ordered from Amazon — Push Button Switch AC 400V Red Sign E-Stop Emergency Mushroom 22mm NO NC + 6pcs End Stop Limited Micro Switch for CNC — https://amzn.to/3qsVXPt
• Crimp-on spades used to attach wiring to end-stop were from this set — Nilight 540PCS Mixed Quick Disconnect Electrical Insulated Butt Bullet Spade Fork Ring Solderless Crimp Terminals 22-16/16-14/12-10 Gauge Electrical Wire Connectors Assortment Kit, 2 Years Warranty — https://amzn.to/3RBi1TR
• Evolution Power Tools R185CCS 7-1/4″ TCT Multi-Material Cutting Circular Saw, 7-1/4″ — https://amzn.to/3JZH4wT
• Female Thread Brass Knurled Threaded Inserts — https://amzn.to/3zWDKOr
• M2 M3 M4 M5 Alloy Steel Socket Head Cap Screws Nuts Set 1060pcs Carbon Steel Screws Assortment Kit — https://amzn.to/3dqfWLf
• Round Magnets (12mm x 3mm) — quite good — eventually shown in use in videos #5 and #6. Quite strong, and working well for this use — MIN CI 100Pcs Super Strong Neodymium Disc Magnets, 12 x 3mm Small Magnets for Dry Erase Board Whiteboard Office Fridge Crafts, Mini Round Rare Earth Magnets for DIY Building Scientific Models — https://amzn.to/3erRCZU
Other Amazon affiliate links:
• Round Magnets (larger — awesome — not shown in use, but I bought them and they are super strong, and could definitely be used for this type of application) — FINDMAG 12 Pack Neodymium Magnets Cup Magnets with Countersunk Hole, Strong Round Base Rare Earth Magnets, 90 LBS Pull Force, 1.26″D x 0.2″H, 12 Screws Included — https://amzn.to/3cRZW52
NOT USED (TOO WEAK – DON’T USE FOR THIS TYPE OF APPLICATION):
• Bar Magnets – which were too weak, apparently NOT neodymium, so probably don’t use these were strength of attraction is needed — https://amzn.to/3AkPr31
If you want to support the channel, you can buy me a coffee:
https://ko-fi.com/design8studio
Thank you very much!!
Or…
My PayPal tip jar: https://paypal.me/design8studio
Or….
Support this channel on Patreon:
https://www.patreon.com/design8studio
source
LowRider 3 CNC Plasma Table PART 1 – floating Z torch mount – uploaded August 15, 2022. Links of interest: • V1 Engineering – LowRIder v3 — https://docs.v1engineering.com/lowrider/ • My thread on V1E forum about my LR3 Plasma Cutting Table — LowRider 3 – Plasma Build “On a Budget” – Clarksburg, WV — https://forum.v1engineering.com/t/lowrider-3-plasma-build-on-a-budget-clarksburg-wv/33849 The latest printable files of the
EASY DIY PLASMA CUTTING TABLE – With Spark Collector Water Table | For Handheld CNC Plasma Cutter
Engineerable
February 21, 2023
I couldn’t find a handheld plasma cutting table with a water table for sparks and slag, so I built my own. This video covered the design, material, and steps to build your own.
The Handheld CNC Plasma Cutter Video is COMING SOON, Subscribe and stay tuned. The hand plasma cutter table was the first thing I needed to build to be able to use the handheld CNC plasma cutter.
▼ MATERIALS:
▶ 2X Aluminum 80/20 Extrusion (Long Side Rails), 1x2x36in: https://www.mcmaster.com/47065T107
▶ 2X Aluminum 80/20 Extrusion (Short Side Rails), 1x2x24in: https://www.mcmaster.com/47065T107
Choose 2ft length.
▶ 3X Aluminum 80/20 Extrusion(Slat Supports), 1x1x36in: https://www.mcmaster.com/47065T101
Choose 3ft length.
▶ 4X Aluminum 80/20 Extrusion (Legs), 1x1x12in:
https://www.mcmaster.com/47065T101
Choose 1ft length or buy longer and cut to length.
▶ 24X T Slot End Fastners: https://ebay.us/DSEITk
(Much more expensive on McMaster: https://www.mcmaster.com/47065T155 )
▶ 54X T Slot Nuts: https://amzn.to/3oJL22r
▶ 54X 1/4-20 x 1-1/4in Long Threaded Rod: https://www.mcmaster.com/91565A544
▶ 6X 1/8in thick by 1in wide by 6ft Flat Steel Bar: Available at Home Depot, hardware store, steel mill
▼ TOOLS:
▶ MARKSMITH Titanium permanent marker made by us: https://amzn.to/3nWisMa
▶ Drill – Ryobi Brushless 18V
▶ Drill & Tap Guide: https://amzn.to/327hFPZ
▶ Tap Guide: https://amzn.to/3oK58d8
▶ 1/4-20 Spiral Point Tap (buy good quality, otherwise you’ll regret it): https://amzn.to/3cyfJSy
▶ Knipex Plier Wrench 10in (The best pliers ever made. You will find yourself using these for everything.): https://amzn.to/3p1SqGG
▼ IN THIS VIDEO
0:00 Intro
2:26 Materials Needed
3:52 Fasteners
5:11 Legs
5:40 Slat Support Design
6:28 STEP 1: Tap Rail Ends
8:34 STEP 2: Legs/Corner Brackets
11:56 STEP 3: Slat Support Holes
13:40 STEP 4: Install Slat Stops
15:26 STEP 5: Add Slat Supports
16:11 STEP 6: Assemble Frame
19:44 STEP 7: Making Slats
20:38 STEP 8: Install Slats
21:00 Test Cuts
21:14 Conclusion & Handheld CNC Plasma Cutter
22:05 What’s Next?
#plasmacutting #plasmacutter #cncplasma #plasmatable #cncplasmacutter #cncplasmacuttingmachine #plasma
EASY DIY Plasma Cutting Table – With Spark Collector
How To Make A PLASMA CUTTING TABLE using this DIY Easy To Build, Bolt Together Cutter Table Design
How To Make A PLASMA CUTTING TABLE With SPARK COLLECTOR | DIY Easy To Build Design for Plasma Cutter
How To Make A PLASMA CUTTING TABLE using this DIY Easy To Build, Bolt Together Cutter Table Design
Every Metal Shop Needs This Plasma Cutting Table. So Easy To Build It… | DIY Plasma Cutter Table
DIY Hand Plasma Cutting Table w/ Water Table Is Easy To Build For Handheld Metal Cutting
Easy DIY Hand Plasma Cutting Table w/ Water Pan for Catching Sparks & Slag | Handheld Metal Cutting
The products shown here were purchased by me with the intent to use them. I did not receive any free items, and I am not being paid or compensated for this review. The video, description, and comments may contain affiliate links. If you click on a link, I may receive a commission. Money earned helps to support my channel and bring you more informative videos about engineering, crafting, and DIY.
source
I couldn’t find a handheld plasma cutting table with a water table for sparks and slag, so I built my own. This video covered the design, material, and steps to build your own. The Handheld CNC Plasma Cutter Video is COMING SOON, Subscribe and stay tuned. The hand plasma cutter table was the first thing I needed to build to
STV CNC SparX10 Plasma Table Setup | Hypotherm Powermax 85 Torch (Today in The Shop #8)
Diamond J Customs, LLC
January 13, 2023
Today Brandon is setting up our new 5×10 STV CNC Plasma Table!
Our plasma table is the SparX Pro 10 CNC Table with the Hypotherm Powermax85 torch head.
We first had to work on attaching and wiring the plasma torch, then Brandon got the STV CNC table running on its own and tracing designs!
On the next episode of today in the shop, we hook the powermax up to the air compressor and power source to get cutting!
Comment any questions you are having with your CNC Table and/or Plasma Torch and we will do our best to help answer them!
Thanks for tuning in, see you next week for Today in The Shop #9
source
Today Brandon is setting up our new 5×10 STV CNC Plasma Table! Our plasma table is the SparX Pro 10 CNC Table with the Hypotherm Powermax85 torch head. We first had to work on attaching and wiring the plasma torch, then Brandon got the STV CNC table running on its own and tracing designs! On the next episode of today