Tag: UCCNC

CNC Milling Machine

DIY CNC Milling Machine Build (Part 15) – Mounting the Spindle, Machine Alignment and First Chips!

Seabass Engineering

March 8, 2023



This time I mount the spindle, wire in spindle control to the CNC controller, align the machine and finally make some chips!

Final part was made using a 10mm indexable insert style cutter, 20,000 RPM, 1.5mm DOC, 1400mm/m feed rate..

Enjoy!
_____________________________________
DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminium tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________

Music Credits
—————–
No Quarter – TechnoAXE

——————
Dark Vs. Light – TechnoAXE


source

This time I mount the spindle, wire in spindle control to the CNC controller, align the machine and finally make some chips! Final part was made using a 10mm indexable insert style cutter, 20,000 RPM, 1.5mm DOC, 1400mm/m feed rate.. Enjoy! _____________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling

CNC Milling Machine

DIY CNC Milling Machine Build (Part 9) NEMA34 Hybrid Stepper Motor X-Axis bracket

Seabass Engineering

February 22, 2023



In this episode I make the X Axis mounting plate for the NEMA 34 Hybrid (closed loop) stepper motor.
_____________________________________
DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminum tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________

Music Credit
—————–
No Quarter – TechnoAXE

——————
Dark vs. Light – – TechnoAXE

source

In this episode I make the X Axis mounting plate for the NEMA 34 Hybrid (closed loop) stepper motor. _____________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the

CNC Milling Machine

DIY CNC Milling Machine (Part 10) – Building a DIY Power Supply & CNC Machining the Z motor mount

Seabass Engineering

December 16, 2022



In this episode I use my brother’s CNC router (that he originally built for making guitars) to machine out the Z axis motor mount and I build my own 70 volt DC power supply for the stepper motors…

Transformer: Toroidal 750VA 230v AC – 24 x 24 AC output – wired in series – AirlinkTransformers.com
Vishay GBPC3504-E4/51 Bridge Rectifier
3x 4700μF 100V DC 35mm Capacitors
2x 1K2 5W resistors wired in series to discharge capacitors when mains power removed.

Still to do – Fuse the 48V output from transformer and individual outputs to Stepper Drivers.
_____________________________________
DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminum tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________

Music Credit
—————–
No Quarter – TechnoAXE

——————
Dark vs. Light – – TechnoAXE

source

In this episode I use my brother’s CNC router (that he originally built for making guitars) to machine out the Z axis motor mount and I build my own 70 volt DC power supply for the stepper motors… Transformer: Toroidal 750VA 230v AC – 24 x 24 AC output – wired in series – AirlinkTransformers.com Vishay GBPC3504-E4/51 Bridge Rectifier 3x

CNC Milling Machine

DIY CNC Milling Machine Build (Part 12) – Limit switches, Wiring and Drag Chain

Seabass Engineering

December 10, 2022



In this video I begin wiring up the machine, mounting the limit switches and attaching the drag chain for the X axis wiring.
_____________________________________
DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminum tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________

Music Credits
—————–
No Quarter – TechnoAXE

——————
Broken Toys – – TechnoAXE
Basic Metal 12 – – TechnoAXE
Machine Takeover – – TechnoAXE
Dark vs. Light – – TechnoAXE

source

In this video I begin wiring up the machine, mounting the limit switches and attaching the drag chain for the X axis wiring. _____________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger

CNC Router

DIY CNC Router: First Movements and Other Projects

Radikult

December 1, 2022



I try to continue with the #DIY #CNC #Router but I have reach a stop, where I need to complete a few small projects in order to continue
Also the very first movements of the CNC (spoiler ends bad) in need of more testing and tuning
Here is where I got the extrusions and brackets and Linear stages
http://linearactuatormotorized.name/c141080_nsk_xy_vexta_motorized_ball_screw_linear_positioning_stage_415_x_425mm_2.htm
https://8020.net/
https://www.ebay.com/itm/Aluminum-extrusion-extruded-8020-channel-profile-t-slot/282320715397

Want to support the channel,——- by buying a reservoir you can help the channel grow and make you computer different

Visit My Official Website/Shop:
http://www.radikult-custom.com/

Ebay Store Reservoir Links:
https://www.ebay.com/itm/223299735167
https://www.ebay.com/itm/223273705318
https://www.ebay.com/itm/223233814756
https://www.ebay.com/itm/223233794652
Check the store for more options

Follow me : https://twitter.com/RadikultCustom
https://Instagram.com/radikultcustom
Or just leave me a comment below for any questions
Email me : [email protected]

source

I try to continue with the #DIY #CNC #Router but I have reach a stop, where I need to complete a few small projects in order to continue Also the very first movements of the CNC (spoiler ends bad) in need of more testing and tuning Here is where I got the extrusions and brackets and Linear stages http://linearactuatormotorized.name/c141080_nsk_xy_vexta_motorized_ball_screw_linear_positioning_stage_415_x_425mm_2.htm https://8020.net/

CNC Milling Machine

DIY CNC Milling Machine Build (Part 13) – Operators Panel and First Movements!

Seabass Engineering

December 1, 2022



In part 13:

– Wiring up the operators control panel
– Add an upper limit switch for the Z axis
– Add a pneumatic strut to support the Z
– First machine movements and backlash testing
_____________________________________
DIY CNC Milling machine build.

My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.

By using aluminium tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!

Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________

Music Credits
—————–
No Quarter – TechnoAXE

——————
Not According To Plan – TechnoAXE
Broken Toys – TechnoAXE
Dropped the E String – TechnoAxe

source

In part 13: – Wiring up the operators control panel – Add an upper limit switch for the Z axis – Add a pneumatic strut to support the Z – First machine movements and backlash testing _____________________________________ DIY CNC Milling machine build. My objective for this project is to design and build a CNC milling machine without the need for