DIY Wire EDM is finally a reality! This has been on our DIY CNC machine radar for quite some time, and finally we have done it. We added this attachment onto an old DIY CNC Machine. After all, it’s an extremely rigid epoxy granite CNC machine with a perfectly fine X Y Z motion system. We hope that getting a good working Wire EDM machine will help us produce better tolerance cuts in metals for our DIY homemade shop.

While this was just our first round of prototyping, we will continue to work on this DIY Wire EDM machine and turn it into a proper homemade CNC EDM Machine.

Make sure to follow our CNC adventures by hitting the SUBSCRIBE button right away – it helps our channel grow!

Free Design Files: https://actionbox.ca/pages/diy-wire-edm

Power Supply: https://actionbox.ca/products/edm-power-supply
Plastic Parts: https://actionbox.ca/products/wire-edm-plastic-parts
Drive Rollers: https://actionbox.ca/products/drive-rollers

Ways To Support Our Channel:
Merchandise: https://actionbox.ca/collections/merchandise
Become A Member: https://www.youtube.com/channel/UCHrFvnP1EEEZHNam_Nk_5rQ/join

Instagram: https://www.instagram.com/action.box/

Check Out These Other Machines We Built:
We built a CNC Machine

We built a Wire EDM

We built an EDM Sinker

We built a Plastic Injection Machine

We built an Anodizing Setup

We built CNC Router

#CNC #machineshop #DIY #epoxy #mill #engineering #machine

source